Product Details
This Whiteline Heavy Duty Adjustable 18mm Rear Sway Bar fits the 2004-2007 Mazda RX-8 Base (SE3P). Placement: rear. Part number BMR77Z. The kit contains 1 sway bar, 4 bushings, and 2 lateral locks.
Roll control is shared between the springs and the bars, and the rear bar is the easier one to use for fine tuning balance. A stiffer bar keeps the rear flatter and moves the car toward a more neutral feel. Adjustable mounting points let you step the stiffness up or down without changing the bar.
Installation is rated moderate, with about 2 hours of work listed. A wheel alignment is not required. To go with it on the RX-8, see Adjustable Rear Sway Bar Link, Adjustable Front Sway Bar Link, and Front Control Arm Lower Inner Front Bushing.
Features
- Adjustable stiffness: More than one adjustment point lets you set the stiffness of the bar.
- Self-lubricating: Internal grease reservoirs keep the bushing lubricated as it works.
- Lateral locks: Lateral locks stop the bar sliding sideways under load.
- Install guide: Instructions for fitting are packed in the box.
- Forged ends: Strength at the bar-to-link connection comes from forged ends.
- Bushing compound: The bushing material stands up to oil, grease, ozone, and weather.
Specifications
| Part Number | BMR77Z |
| Part Name | Sway Bar |
| Vehicle | 2004-2007 Mazda RX-8 Base |
| Chassis Code | SE3P |
| Adjustable | Yes |
| Bar Color | Silver |
| Bar Diameter | 18 mm |
| Bushing Color | Black |
| Bushing Material | Polyurethane |
| Bushings Included | Yes |
| Finish | Powder Coated |
| Grade Type | Performance |
| Installation Difficulty | Moderate |
| Installation Time (hrs) | 2 |
| Kit Contents | 1 Sway Bar, 4 Bushings, 2 Lateral Locks |
| Material | Solid Spring Steel |
| Mounting Brackets Included | No |
| Mounting Hardware Included | No |
| Suspension Grade Type | Performance |
| Sway Bar Links Included | No |
| Vehicle Placement | Rear |
| Wheel Alignment Required | No |
| Notes | - |



