Product Details
This Whiteline Rear Differential Mount Front Bushing Kit fits the 2003-2004 Mitsubishi Lancer Evolution Base (CS). It goes on the rear of the vehicle. Whiteline's note for this fit: Suits models without Active Yaw Control: pinion mount. Included: 4 bushings and 2 tubes. Part number W0592.
Holding the differential still is about predictability. Rubber that is too soft lets it twist and move as load comes on and off, so the car squats and lurches a little more than it needs to. A firmer mount keeps it where it should be. The polyurethane used here deflects much less than the original rubber under the same load.
Whiteline rates the install as difficult and lists about 4 hours. Get the car aligned once it is back on the ground. To go with it on the Lancer Evolution, see Front Control Arm Lower Inner Rear Bushing, Rear Sway Bar Link, and Front and Rear Sway Bar Kit.
Features
- Bushing material: The bushing material is polyurethane, a firmer choice than rubber.
- Corrosion protection: A protective plating covers the metal components to guard against corrosion.
- Bushing compound: The elastomer formulation is chosen to shrug off oil, grease, ozone, and the elements.
- Finish: Powder coat finish guards the metal against chips and corrosion.
Specifications
| Part Number | W0592 |
| Part Name | Differential Mount Bushing |
| Vehicle | 2003-2004 Mitsubishi Lancer Evolution Base |
| Drivetrain | AWD |
| Chassis Code | CS |
| Bushing Color | Black |
| Bushing Material | Polyurethane |
| Color | Black |
| Durometer | 85 |
| Installation Difficulty | Difficult |
| Installation Time (hrs) | 4 |
| Kit Contents | 4 Bushings, 2 Tubes |
| Material | Polyurethane |
| Mounting Hardware Included | No |
| Universal or Specific Fit | Specific Fit |
| Vehicle Placement | Rear |
| Wheel Alignment Required | Yes |
| Notes | Suits models without Active Yaw Control - Pinion mount - 45mm OD |




