Product Details
This Whiteline Front and Rear Sway Bar Kit fits the 2003-2008 Mitsubishi Lancer Evolution Base (CS). Position: front and rear. Order it as part number BMK009. Included: 2 sway bars, 4 links, 4 bushings, 2 lateral locks, and 8 washers. Whiteline's note for this fit: Contains BMF48, BMR65XZ, KLC139 and KLC102.
Front and rear sway bars work as a team. The bars resist roll by twisting, and their relative stiffness shapes whether the car feels planted or loose at the limit. This kit supplies both ends so the balance stays under control. The bar is adjustable, so the stiffness can be changed to suit the car and the road.
Expect a moderate job of about 4 hours. A wheel alignment is not required. To go with it on the Lancer Evolution, see Front Control Arm Lower Inner Rear Bushing, Rear Sway Bar Link, and Rear Trailing Arm Lower Front Bushing.
Features
- Rigid design: Less flex than the original parts means a quicker, more direct response, especially in lane changes and at initial turn-in.
- Forged ends: Forged bar ends add strength where the bar meets the link.
- PTFE lined: A PTFE lining lowers friction so the bushing needs no lubrication.
- Bushing compound: Oil, grease, ozone, and weather do not break down the synthetic elastomer used in the bushings.
- Lateral locks: Lateral locks stop the bar sliding sideways under load.
- Construction: Made from strong, light alloy.
Specifications
| Part Number | BMK009 |
| Part Name | Sway Bars |
| Vehicle | 2003-2008 Mitsubishi Lancer Evolution Base |
| Drivetrain | AWD |
| Chassis Code | CS |
| Bushing Material | Polyurethane |
| Sway Bar Adjustable - Front | No |
| Sway Bar Diameter - Front | 26 mm |
| Sway Bar Included - Front | Yes |
| Sway Bar Links Included - Front | Yes |
| Grade Type | Performance |
| Installation Difficulty | Moderate |
| Installation Time (hrs) | 4 |
| Kit Contents | 2 Sway Bars, 4 Links, 4 Bushings, 2 Lateral Locks, 8 Washers |
| Sway Bar Adjustable - Rear | Yes |
| Sway Bar Diameter - Rear | 24 mm |
| Sway Bar Included - Rear | Yes |
| Sway Bar Links Included - Rear | Yes |
| Wheel Alignment Required | No |
| Notes | Sway bar Front 26mm (Non Adjustable) and Rear 24mm (3 point adjustable). Contains BMF48, BMR65XZ, KLC139 and KLC102 - essential to Activate more grip |



