Product Details
This Whiteline 24mm Rear Sway Bar Mount Kit fits the 2003-2008 Mitsubishi Lancer Evolution Base. This part is for the rear of the vehicle. The part number is KBR22-24. It is listed for the CS chassis. You receive 2 bushings, 2 mounts, 2 saddles, 4 bolts, 8 washers, and 4 nuts. Trim named on the listing: Base. Whiteline's note for this fit: Heavy duty mount incl bushings.
The sway bar sits in rubber bushings that let it rotate as it twists. When those bushings wear or compress, the bar slides and shifts in its mounts, which causes clunking and a slight delay before it begins to resist roll. Replacement bushings hold the bar in its proper place while still letting it turn. The polyurethane used here deflects much less than the original rubber under the same load.
Expect a moderate job of about 1 hour. No alignment is needed afterward. To go with it on the Lancer Evolution, see Front Control Arm Lower Inner Rear Bushing, Rear Sway Bar Link, and Front and Rear Sway Bar Kit.
Features
- Install guide: Instructions for fitting are packed in the box.
- Bushing compound: The bushing material stands up to oil, grease, ozone, and weather.
- Finish: A powder coated finish resists corrosion and wear.
- Hardware: Supplied with mounting hardware.
- Bushing material: Polyurethane is firmer than the factory rubber, so it deflects less under load.
- Self-lubricating: Grease reservoirs inside the bushing feed lubrication as it moves.
Specifications
| Part Number | KBR22-24 |
| Part Name | Sway Bar Mount |
| Vehicle | 2003-2008 Mitsubishi Lancer Evolution Base |
| Drivetrain | AWD |
| Chassis Code | CS |
| Bar Diameter | 24 mm |
| Bushing Color | Black |
| Bushing Material | Polyurethane |
| Bushing Quantity | 2 |
| Grade Type | Performance |
| Grease Fitting Included | No |
| Inside Diameter | 24 mm |
| Installation Difficulty | Moderate |
| Installation Time (hrs) | 1 |
| Kit Contents | 2 Bushings, 2 Mounts, 2 Saddles, 4 Bolts, 8 Washers, 4 Nuts |
| Material | Polyurethane |
| Mounting Hardware Included | Yes |
| Vehicle Placement | Rear |
| Wheel Alignment Required | No |
| Notes | Heavy duty mount incl bushings |