Product Details

This Whiteline Rear Sway Bar Link fits the 2007-2012 Dodge Caliber SE, SXT (PM). Placement: rear. Part number W23180. Chassis code: PM. You receive 2 links.

A sway bar link is the short rod that ties each end of the rear sway bar to the suspension. Whenever the body leans, the link carries that motion into the bar, so any slop, flex, or wear in it is slop in the whole roll-control system.

Whiteline rates the install as easy and lists about 1 hour. It does not require a wheel alignment. To go with it on the Caliber, see 14mm Adjustable Front Camber Bolts, Adjustable Front Sway Bar Link, and Front Control Arm Lower Inner Rear Bushing.

Features

  • Rigid design: Taking the flex out of the connection makes the car react faster to steering input.
  • Ball joints: Steel ball joint ends are built for heavy loads and free movement.
  • Easy to fit: Installation does not call for special skills or tools.
  • Install guide: Written install instructions are included with the part.
  • Preload-free setup: The length can be set on the car to remove preload from the sway bar.
  • Material: Made from steel.
Specifications
Part Number W23180
Part Name Sway Bar Link
Vehicle 2007-2012 Dodge Caliber SE, SXT
Drivetrain FWD/AWD
Chassis Code PM
Bolt Thread Diameter 10 mm
Grade Type Performance
Installation Difficulty Easy
Installation Time (hrs) 1
Kit Contents 2 Links
Length 80-320 mm
Material Steel
Vehicle Placement Rear
Wheel Alignment Required No
Notes Universal cut to length link - must cut to 76mm

Vehicle fitment

This product fits the vehicles listed below.

YearMakeModelDrivetrainNotes
2007DodgeCaliberFWDUniversal cut to length link - must cut to 76mm
2007DodgeCaliberAWDUniversal cut to length link - must cut to 76mm
2008DodgeCaliberFWDUniversal cut to length link - must cut to 76mm
2008DodgeCaliberAWDUniversal cut to length link - must cut to 76mm
2009DodgeCaliberFWDUniversal cut to length link - must cut to 76mm
2009DodgeCaliberAWDUniversal cut to length link - must cut to 76mm
2010DodgeCaliberFWDUniversal cut to length link - must cut to 76mm
2010DodgeCaliberAWDUniversal cut to length link - must cut to 76mm
2011DodgeCaliberFWDUniversal cut to length link - must cut to 76mm
2011DodgeCaliberAWDUniversal cut to length link - must cut to 76mm
2012DodgeCaliberFWDUniversal cut to length link - must cut to 76mm
2012DodgeCaliberAWDUniversal cut to length link - must cut to 76mm

Customer Reviews

Questions & Answers