Product Details

This Whiteline Adjustable Front Sway Bar Link fits the 2008-2010 Dodge Caliber R/T (PM). Part number KLC163. The kit contains 2 links. This part is for the front of the vehicle.

The front sway bar can only do its job if its ends are tied firmly to the wheels, and the links make that connection. A loose or flexible link lets the body lean before the bar starts to push back, which is why worn links show up as a knock over bumps or a delayed feel at turn-in. Its adjustable body lets you set the length with the car on the ground, so the bar is not twisted against its own mounts before the car even moves.

Installation is rated moderate, with about 1 hour of work listed. It does not require a wheel alignment. To go with it on the Caliber, see Adjustable Rear Sway Bar Link, 14mm Adjustable Front Camber Bolts, and Front Control Arm Lower Inner Rear Bushing.

Features

  • Construction: Made from strong, light alloy.
  • Pre-greased: Pre-greased at the factory so it can be fitted right away.
  • Hardware: Supplied with locking nuts and washers.
  • Ball joints: Steel ball joint ends handle the loads and rotate to suit the car's geometry.
  • Rigid design: A stiffer design than the factory part gives a more immediate response.
  • Install guide: Step-by-step installation instructions come with it.
Specifications
Part Number KLC163
Part Name Sway Bar Link
Vehicle 2008-2010 Dodge Caliber R/T
Chassis Code PM
Adjustable Yes
Bolt Thread Diameter 10 mm
Grade Type Performance
Grease Fitting Included No
Greaseable No
Installation Difficulty Moderate
Installation Time (hrs) 1
Kit Contents 2 Links
Length 270-295 mm
Locking Nuts Included Yes
Material Aluminum Alloy
Pre-Greased Yes
Washers Included Yes
Vehicle Placement Front
Wheel Alignment Required No
Notes Length 270-295mm. Bolt Diameter 10mm.

Vehicle fitment

This product fits the vehicles listed below.

YearMakeModelNotes
2008DodgeCaliberLength 270-295mm. Bolt Diameter 10mm.
2009DodgeCaliberLength 270-295mm. Bolt Diameter 10mm.
2010DodgeCaliberLength 270-295mm. Bolt Diameter 10mm.

Customer Reviews

Questions & Answers