Product Details
This Whiteline Front Control Arm Lower Inner Rear Bushing fits the 2007-2010 Dodge Caliber R/T (PM). Application note: Standard Replacement. Whiteline part number: W53382. The kit contains 2 shell bushings and 2 tubes. This part is for the front of the vehicle.
Every time the wheel moves, the control arm swings on its bushings. When they are soft or worn, the arm shifts under load, the alignment changes as the car moves, and steering and braking feel less precise. A stiffer bushing cuts that unwanted movement while still letting the arm pivot freely. Polyurethane resists deflection far better than the soft rubber it replaces.
Whiteline rates the install as difficult and lists about 2.5 hours. An alignment is required after installation. We also list Adjustable Rear Sway Bar Link, 14mm Adjustable Front Camber Bolts, and Adjustable Front Sway Bar Link for the Caliber.
Features
- Install guide: Step-by-step installation instructions come with it.
- Self-lubricating: Grease reservoirs inside the bushing feed lubrication as it moves.
- Bonded design: The bushing is bonded for strength where loads are highest.
- Finish: The metal is powder coated, which resists corrosion and wear.
- Bushing compound: The elastomer formulation is chosen to shrug off oil, grease, ozone, and the elements.
- Grease: Molybdenum disulfide grease comes with it for a longer service life.
Specifications
| Part Number | W53382 |
| Part Name | Control Arm Bushing |
| Vehicle | 2007-2010 Dodge Caliber R/T |
| Drivetrain | FWD/AWD |
| Chassis Code | PM |
| Bushing 1 Inner Diameter | 14.3 mm |
| Bushing 1 Outer Diameter | 60.2 mm |
| Bushing Quantity | 2 Shell Bushings |
| Grade Type | Regular |
| Installation Difficulty | Difficult |
| Installation Time (hrs) | 2.5 |
| Kit Contents | 2 Shell Bushings, 2 Tubes |
| Material | Polyurethane |
| Mounting Hardware Included | No |
| Vehicle Placement | Front |
| Wheel Alignment Required | Yes |
| Notes | Standard Replacement |




