Product Details
This Whiteline Adjustable Rear Sway Bar Link fits the 2008-2009 Dodge Caliber SRT4 Base (PM). Included: 2 links. Part number KLC144. Whiteline's note for this fit: Adjustable Extra Heavy Duty. Position: rear.
A sway bar link is the short rod that ties each end of the rear sway bar to the suspension. Whenever the body leans, the link carries that motion into the bar, so any slop, flex, or wear in it is slop in the whole roll-control system. A body that adjusts in length means the link can be matched to the car instead of the other way around, and the bar starts from a neutral position.
Whiteline rates the install as moderate and lists about 1 hour. A wheel alignment is not required. Other Whiteline parts we list for the Caliber SRT4: Adjustable Front Sway Bar Link and Front Control Arm Lower Inner Rear Bushing.
Features
- Pre-greased: Pre-greased at the factory so it can be fitted right away.
- Construction: The body is made from high-grade alloy for strength without added weight.
- Install guide: Instructions for fitting are packed in the box.
- Hardware: Also in the box: locking nuts and washers.
- Preload-free setup: The length can be set on the car to remove preload from the sway bar.
- Ball joints: Heavy duty steel ball joint ends pivot freely through a wide range, which helps fitment.
Specifications
| Part Number | KLC144 |
| Part Name | Sway Bar Link |
| Vehicle | 2008-2009 Dodge Caliber SRT4 Base |
| Chassis Code | PM |
| Adjustable | Yes |
| Bolt Thread Diameter | 10 mm |
| Grade Type | Performance |
| Grease Fitting Included | No |
| Greaseable | No |
| Installation Difficulty | Moderate |
| Installation Time (hrs) | 1 |
| Kit Contents | 2 Links |
| Length | 90-115 mm |
| Locking Nuts Included | Yes |
| Material | Aluminum Alloy |
| Pre-Greased | Yes |
| Washers Included | Yes |
| Vehicle Placement | Rear |
| Wheel Alignment Required | No |
| Notes | Adjustable Extra Heavy Duty. Length 90-115mm. Bolt Diameter 10mm. |



