Product Details
This Whiteline Adjustable Front Sway Bar Link fits the 2008-2009 Dodge Caliber SRT4 Base (PM). In the box: 2 links. Order it as part number KLC163. Placement: front.
A sway bar link is the short rod that ties each end of the front sway bar to the suspension. Whenever the body leans, the link carries that motion into the bar, so any slop, flex, or wear in it is slop in the whole roll-control system. Because the length is adjustable, the link can be set on the car so the bar sits relaxed at rest, which matters most after a change in ride height.
Whiteline rates the install as moderate and lists about 1 hour. It does not require a wheel alignment. We also list Adjustable Rear Sway Bar Link and Front Control Arm Lower Inner Rear Bushing for the Caliber SRT4.
Features
- Preload-free setup: Length adjustment on the car lets you take preload out of the bar.
- Construction: The body is made from high-grade alloy for strength without added weight.
- Rigid design: Less flex than the original parts means a quicker, more direct response, especially in lane changes and at initial turn-in.
- Hardware: Supplied with locking nuts and washers.
- Pre-greased: Comes pre-greased, so it can go straight on the car.
- Install guide: Step-by-step installation instructions come with it.
Specifications
| Part Number | KLC163 |
| Part Name | Sway Bar Link |
| Vehicle | 2008-2009 Dodge Caliber SRT4 Base |
| Chassis Code | PM |
| Adjustable | Yes |
| Bolt Thread Diameter | 10 mm |
| Grade Type | Performance |
| Grease Fitting Included | No |
| Greaseable | No |
| Installation Difficulty | Moderate |
| Installation Time (hrs) | 1 |
| Kit Contents | 2 Links |
| Length | 270-295 mm |
| Locking Nuts Included | Yes |
| Material | Aluminum Alloy |
| Pre-Greased | Yes |
| Washers Included | Yes |
| Vehicle Placement | Front |
| Wheel Alignment Required | No |
| Notes | Length 270-295mm. Bolt Diameter 10mm. |



