Product Details
This Whiteline Front Control Arm Lower Inner Rear Bushing fits the 2008-2009 Dodge Caliber SRT4 Base (PM). The kit contains 2 shell bushings and 2 tubes. Whiteline's note for this fit: Standard Replacement. Whiteline part number: W53382. Placement: front.
A control arm bushing is the pivot where the arm joins the chassis or the wheel carrier. Factory rubber is chosen for quiet and comfort, so it squashes under braking, acceleration, and cornering and lets the arm move more than it should. A firmer replacement keeps the arm where it belongs, which steadies the alignment and gives the car a more consistent feel. The polyurethane used here deflects much less than the original rubber under the same load.
Installation is rated difficult, with about 2.5 hours of work listed. Get the car aligned once it is back on the ground. Other Whiteline parts we list for the Caliber SRT4: Adjustable Rear Sway Bar Link and Adjustable Front Sway Bar Link.
Features
- Self-lubricating: The bushing carries its own grease supply in internal reservoirs, so it keeps moving freely.
- Bushing compound: The elastomer formulation is chosen to shrug off oil, grease, ozone, and the elements.
- Bonded design: The bushing is bonded for strength where loads are highest.
- Material: Made from polyurethane.
- Grease: Supplied with molybdenum disulfide grease for extended service life.
- Corrosion protection: Plated finish keeps rust off the hardware.
Specifications
| Part Number | W53382 |
| Part Name | Control Arm Bushing |
| Vehicle | 2008-2009 Dodge Caliber SRT4 Base |
| Chassis Code | PM |
| Bushing 1 Inner Diameter | 14.3 mm |
| Bushing 1 Outer Diameter | 60.2 mm |
| Bushing Quantity | 2 Shell Bushings |
| Grade Type | Regular |
| Installation Difficulty | Difficult |
| Installation Time (hrs) | 2.5 |
| Kit Contents | 2 Shell Bushings, 2 Tubes |
| Material | Polyurethane |
| Mounting Hardware Included | No |
| Vehicle Placement | Front |
| Wheel Alignment Required | Yes |
| Notes | Standard Replacement |



