Product Details
This Whiteline Rear Upper Inner Control Arm Bushing fits the 2004-2007 Mazda RX-8 Base (SE3P). Placement: rear. You receive 2 shell bushings and 2 tubes. Order it as part number W63388.
Every time the wheel moves, the control arm swings on its bushings. When they are soft or worn, the arm shifts under load, the alignment changes as the car moves, and steering and braking feel less precise. A stiffer bushing cuts that unwanted movement while still letting the arm pivot freely. The polyurethane used here deflects much less than the original rubber under the same load.
Expect a moderate job of about 3 hours. Get the car aligned once it is back on the ground. We also list Adjustable Rear Sway Bar Link, Adjustable Front Sway Bar Link, and Front and Rear Sway Bar Kit for the RX-8.
Features
- Bonded design: The bushing is bonded for extra strength under heavy loads.
- Self-lubricating: The bushing carries its own grease supply in internal reservoirs, so it keeps moving freely.
- Material: Built from polyurethane.
- Corrosion protection: The hardware is plated to stand up to road conditions.
- Finish: Powder coat finish guards the metal against chips and corrosion.
- Bushing compound: A synthetic elastomer compound resists oil, grease, ozone, and weathering.
Specifications
| Part Number | W63388 |
| Part Name | Control Arm Bushing |
| Vehicle | 2004-2007 Mazda RX-8 Base |
| Chassis Code | SE3P |
| Bushing 1 Inner Diameter | 12.2 mm |
| Bushing 1 Outer Diameter | 40.2 mm |
| Bushing Quantity | 2 Shell Bushings |
| Grade Type | Regular |
| Installation Difficulty | Moderate |
| Installation Time (hrs) | 3 |
| Kit Contents | 2 Shell Bushings, 2 Tubes |
| Material | Polyurethane |
| Mounting Hardware Included | No |
| Vehicle Placement | Rear |
| Wheel Alignment Required | Yes |
| Notes | - |



