Product Details

This Whiteline Rear Control Arm Upper Front Bushing fits the 2013-2014 Chrysler 300C Luxury (LD). Included: 4 shell bushings and 4 tubes. Whiteline's note for this fit: Adds +/- 0.5 degrees Camber. Qty 2 needed per vehicle. Part number W63342. Position: rear.

Camber is the sideways lean of the wheel when viewed from the front. An offset control arm bushing places the pivot slightly off-center, which shifts the wheel's camber by a small, fixed amount without replacing the arm. On a lowered car that is often enough to bring the tires back toward an even footprint.

Expect a moderate job of about 3 hours. Plan on a wheel alignment afterward. Other Whiteline parts we list for the 300C: Rear Subframe Mount Bushing, Front and Rear Sway Bar Kit, and Rear Sway Bar Mount Bushing Kit.

Features

  • Material: Polyurethane construction.
  • Bushing compound: The elastomer formulation is chosen to shrug off oil, grease, ozone, and the elements.
  • Camber adjustment: Helps hold the tire flatter on the road by correcting camber changes through roll.
  • Bonded design: The bushing is bonded for strength where loads are highest.
  • Corrosion protection: Plated finish keeps rust off the hardware.
  • Install guide: Step-by-step installation instructions come with it.
Specifications
Part Number W63342
Part Name Control Arm Bushing
Vehicle 2013-2014 Chrysler 300C Luxury
Drivetrain RWD/AWD
Chassis Code LD
Bushing 1 Inner Diameter 12.2 mm
Bushing 1 Outer Diameter 39.5 mm
Bushing 2 Inner Diameter 12.2 mm
Bushing Quantity 4 Shell Bushings
Grade Type Regular
Installation Difficulty Moderate
Installation Time (hrs) 3
Kit Contents 4 Shell Bushings, 4 Tubes
Material Polyurethane
Mounting Hardware Included No
Vehicle Placement Rear
Wheel Alignment Required Yes
Notes Adds +/- 0.5Degree Camber. Qty 2 needed per vehicle.

Vehicle fitment

This product fits the vehicles listed below.

YearMakeModelDrivetrainNotes
2013Chrysler300CRWDAdds +/- 0.5Degree Camber. Qty 2 needed per vehicle.
2013Chrysler300CAWDAdds +/- 0.5Degree Camber. Qty 2 needed per vehicle.
2014Chrysler300CRWDAdds +/- 0.5Degree Camber. Qty 2 needed per vehicle.
2014Chrysler300CAWDAdds +/- 0.5Degree Camber. Qty 2 needed per vehicle.

Customer Reviews

Questions & Answers