Product Details
This Whiteline Rear Control Arm Upper Front Bushing fits the 2009 Chrysler 300C Signature Series (LX). Application note: Adds +/- 0.5 degrees Camber. Qty 2 needed per vehicle. Position: rear. Order it as part number W63342. The kit contains 4 shell bushings and 4 tubes.
Lowering a car or fitting wider tires can push camber out of the range an alignment shop can correct with factory parts. This offset bushing moves the arm's pivot point to give the technician more to work with, while also replacing the soft rubber that was there.
Expect a moderate job of about 3 hours. Get the car aligned once it is back on the ground. We also list Rear Subframe Mount Bushing, Front and Rear Sway Bar Kit, and Front Lower Radius Arm Bushing for the 300C.
Features
- Bonded design: The bushing is bonded for extra strength under heavy loads.
- Install guide: An install guide comes in the box.
- Finish: A powder coated finish resists corrosion and wear.
- Camber adjustment: Helps keep camber in range so the tire holds its footprint through a corner.
- Self-lubricating: Grease reservoirs inside the bushing feed lubrication as it moves.
- Corrosion protection: The hardware is plated to stand up to road conditions.
Specifications
| Part Number | W63342 |
| Part Name | Control Arm Bushing |
| Vehicle | 2009 Chrysler 300C Signature Series |
| Drivetrain | RWD/AWD |
| Chassis Code | LX |
| Bushing 1 Inner Diameter | 12.2 mm |
| Bushing 1 Outer Diameter | 39.5 mm |
| Bushing 2 Inner Diameter | 12.2 mm |
| Bushing Quantity | 4 Shell Bushings |
| Grade Type | Regular |
| Installation Difficulty | Moderate |
| Installation Time (hrs) | 3 |
| Kit Contents | 4 Shell Bushings, 4 Tubes |
| Material | Polyurethane |
| Mounting Hardware Included | No |
| Vehicle Placement | Rear |
| Wheel Alignment Required | Yes |
| Notes | Adds +/- 0.5Degree Camber. Qty 2 needed per vehicle. |



