Product Details
This Whiteline Rear Control Arm Upper Front Bushing fits the 2008-2009 Chrysler 300C LX (LX). Part number W63342. Application note: Adds +/- 0.5 degrees Camber. Qty 2 needed per vehicle. The kit contains 4 shell bushings and 4 tubes. Placement: rear.
Camber is the sideways lean of the wheel when viewed from the front. An offset control arm bushing places the pivot slightly off-center, which shifts the wheel's camber by a small, fixed amount without replacing the arm. On a lowered car that is often enough to bring the tires back toward an even footprint.
Expect a moderate job of about 3 hours. Get the car aligned once it is back on the ground. Other Whiteline parts we list for the 300C: Rear Subframe Mount Bushing, Front and Rear Sway Bar Kit, and Front Lower Radius Arm Bushing.
Features
- Bonded design: A bonded design adds strength for high load applications.
- Install guide: Written install instructions are included with the part.
- Finish: Powder coating covers the metal for protection against chips and rust.
- Camber adjustment: Helps hold the tire flatter on the road by correcting camber changes through roll.
- Corrosion protection: Plated finish keeps rust off the hardware.
- Material: Built from polyurethane.
Specifications
| Part Number | W63342 |
| Part Name | Control Arm Bushing |
| Vehicle | 2008-2009 Chrysler 300C LX |
| Drivetrain | RWD/AWD |
| Chassis Code | LX |
| Bushing 1 Inner Diameter | 12.2 mm |
| Bushing 1 Outer Diameter | 39.5 mm |
| Bushing 2 Inner Diameter | 12.2 mm |
| Bushing Quantity | 4 Shell Bushings |
| Grade Type | Regular |
| Installation Difficulty | Moderate |
| Installation Time (hrs) | 3 |
| Kit Contents | 4 Shell Bushings, 4 Tubes |
| Material | Polyurethane |
| Mounting Hardware Included | No |
| Vehicle Placement | Rear |
| Wheel Alignment Required | Yes |
| Notes | Adds +/- 0.5Degree Camber. Qty 2 needed per vehicle. |




