Product Details
Whiteline built the Adjustable Front Sway Bar Link (Models w/ Pressed Steel Arms) for the 2002-2006 Volkswagen Jetta GLI (1J/1K). This part is for the front of the vehicle. Whiteline part number: KLC150. Application note: Suits Models with Pressed Steel Arm. Adjustable Extra Heavy Duty. The listing names the GLI trim. Included: 2 links.
The front sway bar can only do its job if its ends are tied firmly to the wheels, and the links make that connection. A loose or flexible link lets the body lean before the bar starts to push back, which is why worn links show up as a knock over bumps or a delayed feel at turn-in. A body that adjusts in length means the link can be matched to the car instead of the other way around, and the bar starts from a neutral position.
Installation is rated moderate, with about 1 hour of work listed. It does not require a wheel alignment. Other Whiteline parts we list for the Jetta: Adjustable Rear Sway Bar Link, Front Control Arm Lower Inner Rear Bushing, and Front and Rear Sway Bar Kit.
Features
- Construction: High-strength alloy gives the strength needed without much weight.
- Ball joints: Steel ball joint ends handle the loads and rotate to suit the car's geometry.
- Anodized alloy: The alloy carries an anodized finish for durability.
- Hardware: Also in the box: locking nuts and washers.
- Pre-greased: Joints arrive pre-greased and ready to install.
- Rigid design: A stiffer design than the factory part gives a more immediate response.
Specifications
| Part Number | KLC150 |
| Part Name | Sway Bar Link |
| Vehicle | 2002-2006 Volkswagen Jetta GLI |
| Chassis Code | 1J/1K |
| Adjustable | Yes |
| Bolt Thread Diameter | 10 mm |
| Grade Type | Performance |
| Grease Fitting Included | No |
| Greaseable | No |
| Installation Difficulty | Moderate |
| Installation Time (hrs) | 1 |
| Kit Contents | 2 Links |
| Length | 110-135 mm |
| Locking Nuts Included | Yes |
| Material | Aluminum Alloy |
| Pre-Greased | Yes |
| Washers Included | Yes |
| Vehicle Placement | Front |
| Wheel Alignment Required | No |
| Notes | Suits Models with Pressed Steel Arm. Adjustable Extra Heavy Duty. Length 110-135mm. Bolt Diameter 10mm. |



