Product Details
This Whiteline Adjustable Front Sway Bar Link fits the 2005 Mazda RX-8 Shinka (SE3P). Whiteline part number: KLC141. In the box: 2 links. Placement: front. Application note: Suits models with control arm link mount: adjustable extra heavy duty.
Links are small parts with a large effect on how a car leans in a corner. They sit between the bar and the suspension and decide how quickly and how evenly the bar's resistance reaches the tire, and this front link is built to keep that connection firm. Because the length is adjustable, the link can be set on the car so the bar sits relaxed at rest, which matters most after a change in ride height.
Expect an easy job of about 1 hour. No alignment is needed afterward. Other Whiteline parts we list for the RX-8: Adjustable Rear Sway Bar Link, Front and Rear Sway Bar Kit, and Front Control Arm Lower Inner Front Bushing.
Features
- Rigid design: A stiffer design than the factory part gives a more immediate response.
- Ball joints: Steel ball joint ends handle the loads and rotate to suit the car's geometry.
- Install guide: Whiteline packs an install guide with it.
- Preload-free setup: The link can be set to length on the vehicle to remove bar preload.
- Material: Built from steel.
- Pre-greased: Pre-greased at the factory so it can be fitted right away.
Specifications
| Part Number | KLC141 |
| Part Name | Sway Bar Link |
| Vehicle | 2005 Mazda RX-8 Shinka |
| Chassis Code | SE3P |
| Adjustable | Yes |
| Bolt Thread Diameter | 10 mm |
| Grade Type | Performance |
| Grease Fitting Included | No |
| Greaseable | No |
| Installation Difficulty | Easy |
| Installation Time (hrs) | 1 |
| Kit Contents | 2 Links |
| Length | 115-140 mm |
| Locking Nuts Included | Yes |
| Material | Steel |
| Pre-Greased | Yes |
| Washers Included | Yes |
| Vehicle Placement | Front |
| Wheel Alignment Required | No |
| Notes | Suits models with control arm link mount - adjustable extra heavy duty. Length 110-135mm |




