Product Details
This Whiteline Front Upper Control Arm Bushing Kit fits the 2004-2007 Mazda RX-8 Base (SE3P). Whiteline's note for this fit: Adds 0.5 degrees Camber. The kit contains 4 bushings and 4 tubes. Order it as part number KCA421. Position: front.
Lowering a car or fitting wider tires can push camber out of the range an alignment shop can correct with factory parts. This offset bushing moves the arm's pivot point to give the technician more to work with, while also replacing the soft rubber that was there.
Whiteline rates the install as moderate and lists about 3 hours. Get the car aligned once it is back on the ground. We also list Adjustable Rear Sway Bar Link, Adjustable Front Sway Bar Link, and Front and Rear Sway Bar Kit for the RX-8.
Features
- Bushing compound: Oil, grease, ozone, and weather do not break down the synthetic elastomer used in the bushings.
- Grease: Supplied with molybdenum disulfide grease for extended service life.
- Self-lubricating: Internal grease reservoirs keep the bushing lubricated as it works.
- Corrosion protection: Rust protection comes from plating on the metal parts.
- Material: Polyurethane construction.
- Camber adjustment: Helps hold the tire flatter on the road by correcting camber changes through roll.
Specifications
| Part Number | KCA421 |
| Part Name | Control Arm Bushing |
| Vehicle | 2004-2007 Mazda RX-8 Base |
| Chassis Code | SE3P |
| Bushing 1 Inner Diameter | 12.5 mm |
| Bushing 1 Outer Diameter | 33.1 mm |
| Bushing Quantity | 4 Bushings |
| Grade Type | Performance |
| Inside Diameter | 10.2 mm |
| Installation Difficulty | Moderate |
| Installation Time (hrs) | 3 |
| Kit Contents | 4 Bushings, 4 Tubes |
| Material | Polyurethane |
| Mounting Hardware Included | No |
| Outside Diameter | 33.1 mm |
| Vehicle Placement | Front |
| Wheel Alignment Required | Yes |
| Notes | Adds 0.5Degree Camber |


