Product Details
This Whiteline Front Control Arm Lower Inner Rear Bushing fits the 2004-2007 Subaru WRX STI Base (GD). Application note: Adds 0.5 degrees Caster & Anti-Lift. Part number KCA359. Included: 2 housings, 12 spacers, 4 bolts, and 6 washers. This part is for the front of the vehicle.
A standard bushing only restores what the factory built. This one is designed to change the geometry, adding positive caster and changing front anti-dive behavior, in addition to resisting the deflection that soft rubber allows.
Whiteline rates the install as difficult and lists about 2.5 hours. An alignment is required after installation. We also list Front and Rear Sway Bar Kit, Front Steering Rack And Pinion Mount Bushing, and Performance Lowering Spring Kit for the WRX STI.
Features
- Finish: Powder coating covers the metal for protection against chips and rust.
- Bump steer: Helps cut bump steer for steadier steering over bumps.
- Hardware: Supplied with mounting hardware.
- Corrosion protection: Rust protection comes from plating on the metal parts.
- Install guide: Written install instructions are included with the part.
- Caster: Caster is optimized for stable steering and good contact through roll.
Specifications
| Part Number | KCA359 |
| Part Name | Control Arm Bushing |
| Vehicle | 2004-2007 Subaru WRX STI Base |
| Drivetrain | AWD |
| Chassis Code | GD |
| Bushing 1 Inner Diameter | 20 mm |
| Bushing 1 Length | 52.5 mm |
| Bushing 1 Outer Diameter | 39.5 mm |
| Bushing 2 Inner Diameter | 20 mm |
| Bushing 2 Length | 52.5 mm |
| Bushing 2 Outer Diameter | 39.5 mm |
| Bushing Quantity | 2 |
| Grade Type | Performance |
| Installation Difficulty | Difficult |
| Installation Time (hrs) | 2.5 |
| Kit Contents | 2 Housings, 12 Spacers, 4 Bolts, 6 Washers |
| Material | Polyurethane |
| Mounting Hardware Included | Yes |
| Outside Diameter | 39.5 mm |
| Vehicle Placement | Front |
| Wheel Alignment Required | Yes |
| Notes | Adds 0.5 Degrees Caster & Anti-Lift |



