Product Details
This Whiteline Front Control Arm Geometry Correction Kit fits the 2015-2016 Volkswagen Golf/GTI R, SE, SEL (AU). Included: 2 shell bushings, 4 bushings, 2 tubes, and 4 washers. This part is for the front of the vehicle. The part number is KCA462. Whiteline's note for this fit: Contains Control arm and Bumpsteer bushings: adds .5 degrees Caster Anti-Lift.
This kit does more than replace rubber. Its offset design moves the pivot point of the lower control arm to add positive caster and change how the front end resists dive under braking, which improves straight-line stability and turn-in feel.
Installation is rated difficult, with about 2 hours of work listed. Get the car aligned once it is back on the ground. To go with it on the Golf/GTI, see Adjustable Rear Sway Bar Link, Adjustable Front Sway Bar Link, and Front and Rear Sway Bar Kit.
Features
- Self-lubricating: Built-in grease reservoirs provide continual lubrication and reduce friction.
- Install guide: Written install instructions are included with the part.
- Bonded design: The bushing is bonded for strength where loads are highest.
- Material: Built from polyurethane.
- Bushing compound: The elastomer formulation is chosen to shrug off oil, grease, ozone, and the elements.
- Finish: The metal is powder coated, which resists corrosion and wear.
Specifications
| Part Number | KCA462 |
| Part Name | Control Arm Correction Kit |
| Vehicle | 2015-2016 Volkswagen Golf/GTI R, SE, SEL |
| Chassis Code | AU |
| Drivetrain | FWD |
| Bushing 1 Inner Diameter | 12.2 mm |
| Bushing 1 Length | 54 mm |
| Bushing 1 Outer Diameter | 36.8 mm |
| Bushing 2 Inner Diameter | 12.2 mm |
| Bushing 2 Length | 54 mm |
| Bushing 2 Outer Diameter | 64.6 mm |
| Bushing Quantity | 2 |
| Grade Type | Performance |
| Installation Difficulty | Difficult |
| Installation Time (hrs) | 2 |
| Kit Contents | 2 Shell Bushings, 4 Bushings, 2 Tubes, 4 Washers |
| Material | Polyurethane |
| Mounting Hardware Included | No |
| Outside Diameter | 36.8 mm |
| Vehicle Placement | Front |
| Wheel Alignment Required | Yes |
| Notes | Contains Control arm and Bumpsteer bushings - adds .5 Degree Caster Anti-Lift |



