Product Details
These Whiteline 12mm Adjustable Front Camber Bolts fit the 1990-1994 Suzuki Swift GS, GT (EA/SA). In the box: 2 bolts. Whiteline's note for this fit: Adds +/- 0.75 degrees Camber. Position: front. Part number KCA412.
Camber is how far the top of the wheel leans in or out when you look at the car from the front, and it decides how the tire meets the road. Many cars leave little or no room to change it at the factory. A camber bolt replaces a standard mounting bolt with an adjustable one, so an alignment shop can move the setting into a better range.
Installation is rated difficult, with about 1 hour of work listed. An alignment is required after installation. To go with it on the Swift, see Front Sway Bar Link Lower Bushing, Rear Control Arm Lower Outer Bushing, and Front Lower Inner Front Control Arm Bushing Kit.
Features
- Locking washer: The teeth on the lock washer keep the bolt from turning once it is tightened.
- Corrosion protection: A protective plating covers the metal components to guard against corrosion.
- Camber adjustment: Designed to optimize camber alignment and offset the effect of body roll and tire roll in corners.
- Install guide: Whiteline packs an install guide with it.
- Hardware: The matching nuts are included.
Specifications
| Part Number | KCA412 |
| Part Name | Camber Bolt |
| Vehicle | 1990-1994 Suzuki Swift GS, GT |
| Chassis Code | EA/SA |
| Adjustable | Yes |
| Bolt Thread Diameter | 12 mm |
| Color | Gray |
| Installation Difficulty | Difficult |
| Installation Time (hrs) | 1 |
| Kit Contents | 2 Bolts |
| Nut Included | Yes |
| Vehicle Placement | Front |
| Wheel Alignment Required | Yes |
| Notes | Adds +/- 0.75 Degree Camber |




