Product Details
This Whiteline Grip Series Front and Rear Performance Suspension Kit fits the 2013 Ford Focus ST Base (C346). The kit contains 4 springs, 2 sway bars, 4 links, 4 bushings, 2 saddles, 4 lateral locks, 10 washers, and 2 nuts. The part number is GS1-FRD004. Placement: front and rear. Whiteline's note for this fit: Suits MY13 models: vehicle sway bar and lowered spring kit, contains WSK-FRD004 and BMK012.
Changing one part of a suspension often shifts the balance of the whole car. A kit that supplies both ends together keeps the front and rear working as a pair instead of fixing one end and leaving the other behind.
Installation is rated difficult, with about 7 hours of work listed. An alignment is required after installation. Other Whiteline parts we list for the Focus ST: Adjustable Rear Sway Bar Link, Front and Rear Sway Bar Kit, and Performance Lowering Spring Kit.
Features
- Bar mounts: Internally knurled mount bushings with lips that hold grease keep the bar lubricated.
- Rigid design: Less flex than the original parts means a quicker, more direct response, especially in lane changes and at initial turn-in.
- Grease: Moly grease is supplied to prolong the life of the parts.
- Spring steel: European made, cold rolled spring steel.
- Bushing compound: Oil, grease, ozone, and weather do not break down the synthetic elastomer used in the bushings.
- Adjustable stiffness: Multiple mounting holes let you tune bar stiffness.
Specifications
| Part Number | GS1-FRD004 |
| Part Name | Suspension Kit |
| Vehicle | 2013 Ford Focus ST Base |
| Drivetrain | FWD |
| Chassis Code | C346 |
| Spring Rate - Front | 239 PPI |
| Sway Bar Adjustable - Front | Yes |
| Sway Bar Diameter - Front | 24 mm |
| Sway Bar Included - Front | Yes |
| Sway Bar Links Included - Front | Yes |
| Installation Difficulty | Difficult |
| Installation Time (hrs) | 7 |
| Kit Contents | 4 Springs, 2 Sway Bars, 4 Links, 4 Bushings, 2 Saddles, 4 Lateral Locks, 10 Washers, 2 Nuts |
| Spring Rate - Rear | 217 PPI |
| Sway Bar Adjustable - Rear | Yes |
| Sway Bar Diameter - Rear | 24 mm |
| Sway Bar Links Included - Rear | Yes |
| Wheel Alignment Required | Yes |
| Notes | Suits MY13 models - vehicle sway bar and lowered spring kit - contains WSK-FRD004 and BMK012 - essential to Activate more grip |

