Product Details
This Whiteline Front and Rear Sway Bar Kit fits the 2013-2018 Ford Focus ST Base (C346). The kit contains 2 sway bars, 4 links, 4 bushings, 2 saddles, 4 lateral locks, and 10 washers. Whiteline's note for this fit: Contains BMF64Z, BMR93Z, KLC163 & KLC195. Position: front and rear. The part number is BMK012.
Body roll shifts load onto the outside tires, and a sway bar is the most direct way to limit it. Fitting stiffer bars at both ends keeps the platform flatter through a corner and lets the car turn in with less lean, and having a front and rear pair designed to work together keeps the balance predictable. Adjustable mounting points let you step the stiffness up or down without changing the bar.
Expect a difficult job of about 3 hours. Plan on a wheel alignment afterward. To go with it on the Focus ST, see Adjustable Rear Sway Bar Link, Performance Lowering Spring Kit, and Heavy Duty Blade Adjustable 24mm Rear Sway Bar.
Features
- Lateral locks: DIY lateral locks stop the bar from shifting sideways under cornering loads.
- Construction: Alloy construction keeps the weight down while handling the loads.
- Bushing material: Polyurethane is firmer than the factory rubber, so it deflects less under load.
- Ball joints: Heavy duty steel ball joint ends pivot freely through a wide range, which helps fitment.
- Finish: Powder coating covers the metal for protection against chips and rust.
- Rigid design: Less flex than the original parts means a quicker, more direct response, especially in lane changes and at initial turn-in.
Specifications
| Part Number | BMK012 |
| Part Name | Sway Bars |
| Vehicle | 2013-2018 Ford Focus ST Base |
| Drivetrain | FWD |
| Chassis Code | C346 |
| Bushing Material | Polyurethane |
| Sway Bar Adjustable - Front | Yes |
| Sway Bar Diameter - Front | 24 mm |
| Sway Bar Included - Front | Yes |
| Sway Bar Links Included - Front | Yes |
| Grade Type | Performance |
| Installation Difficulty | Difficult |
| Installation Time (hrs) | 3 |
| Kit Contents | 2 Sway Bars, 4 Links, 4 Bushings, 2 Saddles, 4 Lateral Locks, 10 Washers |
| Sway Bar Adjustable - Rear | Yes |
| Sway Bar Diameter - Rear | 24 mm |
| Sway Bar Included - Rear | Yes |
| Sway Bar Links Included - Rear | Yes |
| Wheel Alignment Required | Yes |
| Notes | Contains BMF64Z, BMR93Z, KLC163 & KLC195 - essential to Activate more grip |



