Product Details
This Whiteline Rear Upper Inner Control Arm Bushing Kit fits the 2013-2019 Ford Escape (C1XX). This part is for the rear of the vehicle. The part number is KCA394. Whiteline's note for this fit: Suits cast arm. On-car adjustable allows +/-1.0 degrees Camber. You receive 2 shell bushings and 2 tubes.
Lowering a car or fitting wider tires can push camber out of the range an alignment shop can correct with factory parts. This offset bushing moves the arm's pivot point to give the technician more to work with, while also replacing the soft rubber that was there.
Whiteline rates the install as moderate and lists about 2 hours. An alignment is required after installation. Other Whiteline parts we list for the Escape: Adjustable Rear Sway Bar Link, Adjustable Rear Upper Control Arm Set, and Adjustable Front Sway Bar Link.
Features
- Grease: Supplied with molybdenum disulfide grease for extended service life.
- Bonded design: The bushing is bonded for extra strength under heavy loads.
- Camber adjustment: Helps hold the tire flatter on the road by correcting camber changes through roll.
- Install guide: Written install instructions are included with the part.
- Corrosion protection: The hardware is plated to stand up to road conditions.
- Material: Built from polyurethane.
Specifications
| Part Number | KCA394 |
| Part Name | Control Arm Bushing |
| Vehicle | 2013-2019 Ford Escape |
| Chassis Code | C1XX |
| Bushing 1 Inner Diameter | 12 mm |
| Bushing 1 Outer Diameter | 38 mm |
| Bushing 2 Outer Diameter | 36.2 mm |
| Bushing Quantity | 2 Shell Bushings |
| Grade Type | Performance |
| Inside Diameter | 12.2 mm |
| Installation Difficulty | Moderate |
| Installation Time (hrs) | 2 |
| Kit Contents | 2 Shell Bushings, 2 Tubes |
| Material | Polyurethane |
| Mounting Hardware Included | No |
| Outside Diameter | 38 mm |
| Vehicle Placement | Rear |
| Wheel Alignment Required | Yes |
| Notes | Suits cast arm. On-car adjustable allows +/-1.0Degree Camber; |