Product Details

This Whiteline Rear Trailing Arm Center Pivot Bushing fits the 1989-2000 Honda Civic Si (EF/EG/EK). The part number is W63452G. In the box: 1 bushing, 1 pin, and an install guide. Chassis code: EF/EG/EK. Application note: Single: fitter friendly design. Placement: rear.

Bushings work out of sight, but they decide how well a suspension holds its geometry. A soft or tired trailing arm bushing allows play that shows up as vague steering, a wandering feel under braking, or a clunk over bumps. Fitting a firmer one takes that slack out. Polyurethane resists deflection far better than the soft rubber it replaces.

Whiteline rates the install as moderate and lists about 3 hours. An alignment is required after installation. We also list Front Upper Control Arm Bushing Kit, Front Sway Bar Link Bushing (28.5mm OD), and Rear Sway Bar Link Bushing (28.5mm OD) for the Civic Si.

Features

  • Corrosion protection: The hardware is plated to stand up to road conditions.
  • Install guide: Step-by-step installation instructions come with it.
  • Bushing compound: Oil, grease, ozone, and weather do not break down the synthetic elastomer used in the bushings.
  • Bushing material: Polyurethane bushings flex far less than rubber ones.
  • Material: Built from polyurethane.
Specifications
Part Number W63452G
Part Name Trailing Arm Bushing
Vehicle 1989-2000 Honda Civic Si
Drivetrain FWD
Chassis Code EF/EG/EK
Bushing Color Black
Bushing Material Polyurethane
Color Black
Grade Type Regular
Installation Difficulty Moderate
Installation Time (hrs) 3
Kit Contents 1 Bushing, 1 Pin, Install Guide
Material Polyurethane
Vehicle Placement Rear
Wheel Alignment Required Yes
Notes Single - OD = 80mm - fitter friendly design

Vehicle fitment

This product fits the vehicles listed below.

YearMakeModelDrivetrainNotes
1989HondaCivic SiFWDSingle - OD = 80mm - fitter friendly design
1990HondaCivic SiFWDSingle - OD = 80mm - fitter friendly design
1991HondaCivic SiFWDSingle - OD = 80mm - fitter friendly design
1992HondaCivic SiFWDSingle - OD = 80mm - fitter friendly design
1993HondaCivic SiFWDSingle - OD = 80mm - fitter friendly design
1994HondaCivic SiFWDSingle - OD = 80mm - fitter friendly design
1995HondaCivic SiFWDSingle - OD = 80mm - fitter friendly design
1996HondaCivic SiFWDSingle - OD = 80mm - fitter friendly design
1997HondaCivic SiFWDSingle - OD = 80mm - fitter friendly design
1998HondaCivic SiFWDSingle - OD = 80mm - fitter friendly design
1999HondaCivic SiFWDSingle - OD = 80mm - fitter friendly design
2000HondaCivic SiFWDSingle - OD = 80mm - fitter friendly design

Customer Reviews

Questions & Answers