Product Details

This Whiteline Rear Sway Bar Link fits the 2010-2017 Chevrolet Corvette Grand Sport (C6/C7). Included: 2 links. Whiteline part number: W23180. This part is for the rear of the vehicle.

A sway bar link is the short rod that ties each end of the rear sway bar to the suspension. Whenever the body leans, the link carries that motion into the bar, so any slop, flex, or wear in it is slop in the whole roll-control system.

Expect an easy job of about 1 hour. No alignment is needed afterward. To go with it on the Corvette, see Front Sway Bar Link.

Features

  • Rigid design: A stiffer design than the factory part gives a more immediate response.
  • Install guide: Written install instructions are included with the part.
  • Ball joints: Steel ball joint ends handle the loads and rotate to suit the car's geometry.
  • Material: Made from steel.
  • Easy to fit: Installation does not call for special skills or tools.
  • Preload-free setup: Length adjustment on the car lets you take preload out of the bar.
Specifications
Part Number W23180
Part Name Sway Bar Link
Vehicle 2010-2017 Chevrolet Corvette Grand Sport
Chassis Code C6/C7
Bolt Thread Diameter 10 mm
Grade Type Performance
Installation Difficulty Easy
Installation Time (hrs) 1
Kit Contents 2 Links
Length 80-320 mm
Material Steel
Vehicle Placement Rear
Wheel Alignment Required No
Notes Universal cut to length link - must cut to 76mm

Vehicle fitment

This product fits the vehicles listed below.

YearMakeModelDrivetrainNotes
2010ChevroletCorvetteRWDUniversal cut to length link - must cut to 76mm
2011ChevroletCorvetteRWDUniversal cut to length link - must cut to 76mm
2012ChevroletCorvetteRWDUniversal cut to length link - must cut to 76mm
2013ChevroletCorvetteRWDUniversal cut to length link - must cut to 76mm
2014ChevroletCorvetteRWDUniversal cut to length link - must cut to 76mm
2015ChevroletCorvetteRWDUniversal cut to length link - must cut to 76mm
2016ChevroletCorvetteRWDUniversal cut to length link - must cut to 76mm
2017ChevroletCorvetteRWDUniversal cut to length link - must cut to 76mm

Customer Reviews

Questions & Answers