Product Details
This Whiteline Rear Sway Bar Link fits the 2007 Chrysler Sebring Base (JS). The part number is W23180. Included: 2 links. This part is for the rear of the vehicle.
The rear sway bar can only do its job if its ends are tied firmly to the wheels, and the links make that connection. A loose or flexible link lets the body lean before the bar starts to push back, which is why worn links show up as a knock over bumps or a delayed feel at turn-in.
Whiteline rates the install as easy and lists about 1 hour. It does not require a wheel alignment. To go with it on the Sebring, see 14mm Adjustable Front Camber Bolts, Adjustable Front Sway Bar Link, and Front Control Arm Lower Inner Rear Bushing.
Features
- Corrosion protection: Metal parts are plated to resist rust over the long term.
- Material: Built from steel.
- Ball joints: Steel ball joint ends are built for heavy loads and free movement.
- Rigid design: Built to remove the flex found in factory parts, so inputs reach the bar sooner.
- Preload-free setup: The length can be set on the car to remove preload from the sway bar.
- Install guide: Step-by-step installation instructions come with it.
Specifications
| Part Number | W23180 |
| Part Name | Sway Bar Link |
| Vehicle | 2007 Chrysler Sebring Base |
| Drivetrain | FWD |
| Chassis Code | JS |
| Bolt Thread Diameter | 10 mm |
| Grade Type | Performance |
| Installation Difficulty | Easy |
| Installation Time (hrs) | 1 |
| Kit Contents | 2 Links |
| Length | 80-320 mm |
| Material | Steel |
| Vehicle Placement | Rear |
| Wheel Alignment Required | No |
| Notes | Universal cut to length link - must cut to 76mm |



