Product Details
This Whiteline Adjustable Front Sway Bar Link fits the 2007-2010 Chrysler Sebring (JS). Whiteline part number: KLC163. It goes on the front of the vehicle. You receive 2 links.
A sway bar link is the short rod that ties each end of the front sway bar to the suspension. Whenever the body leans, the link carries that motion into the bar, so any slop, flex, or wear in it is slop in the whole roll-control system. Its adjustable body lets you set the length with the car on the ground, so the bar is not twisted against its own mounts before the car even moves.
Installation is rated moderate, with about 1 hour of work listed. No alignment is needed afterward. We also list Adjustable Rear Sway Bar Link, 14mm Adjustable Front Camber Bolts, and Front Control Arm Lower Inner Rear Bushing for the Sebring.
Features
- Anodized alloy: The alloy is anodized, adding a durable protective layer.
- Preload-free setup: Setting the length on the car lets the bar rest without preload.
- Pre-greased: Joints arrive pre-greased and ready to install.
- Hardware: The kit includes locking nuts and washers.
- Rigid design: Built to remove the flex found in factory parts, so inputs reach the bar sooner.
- Construction: Alloy construction keeps the weight down while handling the loads.
Specifications
| Part Number | KLC163 |
| Part Name | Sway Bar Link |
| Vehicle | 2007-2010 Chrysler Sebring |
| Chassis Code | JS |
| Adjustable | Yes |
| Bolt Thread Diameter | 10 mm |
| Grade Type | Performance |
| Grease Fitting Included | No |
| Greaseable | No |
| Installation Difficulty | Moderate |
| Installation Time (hrs) | 1 |
| Kit Contents | 2 Links |
| Length | 270-295 mm |
| Locking Nuts Included | Yes |
| Material | Aluminum Alloy |
| Pre-Greased | Yes |
| Washers Included | Yes |
| Vehicle Placement | Front |
| Wheel Alignment Required | No |
| Notes | Length 270-295mm. Bolt Diameter 10mm. |



