Product Details
This Whiteline Rear Sway Bar Link fits the 2007-2010 Chrysler Sebring Limited, Touring (JS). Order it as part number W23180. Placement: rear. In the box: 2 links.
A sway bar link is the short rod that ties each end of the rear sway bar to the suspension. Whenever the body leans, the link carries that motion into the bar, so any slop, flex, or wear in it is slop in the whole roll-control system.
Installation is rated easy, with about 1 hour of work listed. It does not require a wheel alignment. We also list 14mm Adjustable Front Camber Bolts, Adjustable Front Sway Bar Link, and Front Control Arm Lower Inner Rear Bushing for the Sebring.
Features
- Ball joints: Steel ball joint ends handle the loads and rotate to suit the car's geometry.
- Install guide: Step-by-step installation instructions come with it.
- Material: Made from steel.
- Rigid design: A stiffer design than the factory part gives a more immediate response.
- Preload-free setup: Setting the length on the car lets the bar rest without preload.
- Corrosion protection: Rust protection comes from plating on the metal parts.
Specifications
| Part Number | W23180 |
| Part Name | Sway Bar Link |
| Vehicle | 2007-2010 Chrysler Sebring Limited, Touring |
| Chassis Code | JS |
| Bolt Thread Diameter | 10 mm |
| Grade Type | Performance |
| Installation Difficulty | Easy |
| Installation Time (hrs) | 1 |
| Kit Contents | 2 Links |
| Length | 80-320 mm |
| Material | Steel |
| Vehicle Placement | Rear |
| Wheel Alignment Required | No |
| Notes | Universal cut to length link - must cut to 76mm |



