Product Details
Looking for a rear sway bar link for your 2000-2006 Toyota MR2 Spyder? The Whiteline Rear Sway Bar Link Kit is made for it. Whiteline's note for this fit: Adjustable Extra Heavy Duty. This part is for the rear of the vehicle. It is listed for the ZZW30 chassis. The kit contains 2 links. Part number KLC140-215.
A sway bar link is the short rod that ties each end of the rear sway bar to the suspension. Whenever the body leans, the link carries that motion into the bar, so any slop, flex, or wear in it is slop in the whole roll-control system. Its adjustable body lets you set the length with the car on the ground, so the bar is not twisted against its own mounts before the car even moves.
Installation is rated moderate, with about 1 hour of work listed. A wheel alignment is not required. Working on the same car? We also list Front Control Arm Lower Inner Rear Bushing, 14mm Adjustable Front Camber Bolts, and Front Sway Bar Bushing Kit for the MR2 Spyder.
Features
- Bushing compound: The elastomer formulation is chosen to shrug off oil, grease, ozone, and the elements.
- Self-lubricating: Built-in grease reservoirs provide continual lubrication and reduce friction.
- Material: The part is made of aluminum alloy.
- Install guide: Written install instructions are included with the part.
- Hardware: Supplied with locking nuts and washers.
- Pre-greased: Comes pre-greased, so it can go straight on the car.
Specifications
| Part Number | KLC140-215 |
| Part Name | Sway Bar Links |
| Vehicle | 2000-2006 Toyota MR2 Spyder |
| Chassis Code | ZZW30 |
| Drivetrain | RWD |
| Adjustable | Yes |
| Bolt Thread Diameter | 10 mm |
| Grade Type | Performance |
| Grease Fitting Included | No |
| Greaseable | No |
| Installation Difficulty | Moderate |
| Installation Time (hrs) | 1 |
| Kit Contents | 2 Links |
| Length | 215-240 mm |
| Locking Nuts Included | Yes |
| Material | Aluminum Alloy |
| Pre-Greased | Yes |
| Washers Included | Yes |
| Vehicle Placement | Rear |
| Wheel Alignment Required | No |
| Notes | Adjustable Extra Heavy Duty. Length 215-240mm. Bolt Diameter 10mm. |