Product Details
This Whiteline Front Control Arm Lower Inner Rear Bushing fits the 2000-2005 Toyota MR2 Spyder Base (ZZW30). Application note: Standard Replacement. Whiteline part number: W53299. You receive 2 shell bushings and 2 tubes. Chassis code: ZZW30. Placement: front.
Bushings work out of sight, but they decide how well a suspension holds its geometry. A soft or tired control arm bushing allows play that shows up as vague steering, a wandering feel under braking, or a clunk over bumps. Fitting a firmer one takes that slack out. The polyurethane used here deflects much less than the original rubber under the same load.
Expect a difficult job of about 2.5 hours. Plan on a wheel alignment afterward. Other Whiteline parts we list for the MR2 Spyder: Front and Rear Sway Bar Vehicle Kit, 14mm Adjustable Front Camber Bolts, and Front Sway Bar Link Kit.
Features
- Bonded design: The bushing is bonded for strength where loads are highest.
- Self-lubricating: Built-in grease reservoirs provide continual lubrication and reduce friction.
- Bushing compound: Oil, grease, ozone, and weather do not break down the synthetic elastomer used in the bushings.
- Corrosion protection: Rust protection comes from plating on the metal parts.
- Material: Made from polyurethane.
- Grease: Molybdenum disulfide grease comes with it for a longer service life.
Specifications
| Part Number | W53299 |
| Part Name | Control Arm Bushing |
| Vehicle | 2000-2005 Toyota MR2 Spyder Base |
| Drivetrain | RWD |
| Chassis Code | ZZW30 |
| Bushing 1 Inner Diameter | 12.2 mm |
| Bushing 1 Outer Diameter | 54.9 mm |
| Bushing Quantity | 2 Shell Bushings |
| Grade Type | Regular |
| Installation Difficulty | Difficult |
| Installation Time (hrs) | 2.5 |
| Kit Contents | 2 Shell Bushings, 2 Tubes |
| Material | Polyurethane |
| Mounting Hardware Included | No |
| Vehicle Placement | Front |
| Wheel Alignment Required | Yes |
| Notes | Standard Replacement |




