Product Details
Here is the Whiteline Rear Sway Bar Link Bushing (28.5mm OD) for the 1988-1990 Toyota Corolla SR5 (E90). You receive 8 bushings. Order it as part number W21014. It goes on the rear of the vehicle.
A sway bar link has a bushing at each end where it connects to the bar and the suspension, and those bushings let the link pivot. When they are soft or worn, the bar takes up slack before it begins resisting body roll, which feels like a delay in turn-in and shows up as clunking. Replacing them restores a firm connection. The polyurethane used here deflects much less than the original rubber under the same load.
Expect an easy job of about 1 hour. No alignment is needed afterward. To go with it on the Corolla, see Adjustable Rear Sway Bar Link, 12mm Adjustable Front Camber Bolts, and Front Control Arm Lower Inner Front Bushing.
Features
- Bushing material: The bushing material is polyurethane, a firmer choice than rubber.
- Bushing compound: Oil, grease, ozone, and weather do not break down the synthetic elastomer used in the bushings.
- Easy to fit: Designed for an easy install with ordinary shop equipment.
Specifications
| Part Number | W21014 |
| Part Name | Sway Bar Link Bushing |
| Vehicle | 1988-1990 Toyota Corolla SR5 |
| Chassis Code | E90 |
| Bushing Color | Black |
| Bushing Material | Polyurethane |
| Durometer | 72 |
| Grade Type | Regular |
| Installation Difficulty | Easy |
| Installation Time (hrs) | 1 |
| Kit Contents | 8 Bushings |
| Vehicle Placement | Rear |
| Wheel Alignment Required | No |
| Notes | - |




