Product Details
Whiteline built the Adjustable Rear Sway Bar Link for the 2009-2011 Toyota Camry Base (XV40). The part number is KLC163. Trim named on the listing: Base. It goes on the rear of the vehicle. You receive 2 links.
The rear sway bar can only do its job if its ends are tied firmly to the wheels, and the links make that connection. A loose or flexible link lets the body lean before the bar starts to push back, which is why worn links show up as a knock over bumps or a delayed feel at turn-in. Its adjustable body lets you set the length with the car on the ground, so the bar is not twisted against its own mounts before the car even moves.
Expect a moderate job of about 1 hour. No alignment is needed afterward. Other Whiteline parts we list for the Camry: Front Control Arm Lower Inner Rear Bushing, Rear Sway Bar Link, and Adjustable Front Sway Bar Link.
Features
- Preload-free setup: Setting the length on the car lets the bar rest without preload.
- Hardware: Hardware supplied: locking nuts and washers.
- Rigid design: A stiffer design than the factory part gives a more immediate response.
- Pre-greased: Joints arrive pre-greased and ready to install.
- Ball joints: Heavy duty steel ball joints at the ends move through a wide arc to suit the application.
- Construction: Made from strong, light alloy.
Specifications
| Part Number | KLC163 |
| Part Name | Sway Bar Link |
| Vehicle | 2009-2011 Toyota Camry Base |
| Chassis Code | XV40 |
| Adjustable | Yes |
| Bolt Thread Diameter | 10 mm |
| Grade Type | Performance |
| Grease Fitting Included | No |
| Greaseable | No |
| Installation Difficulty | Moderate |
| Installation Time (hrs) | 1 |
| Kit Contents | 2 Links |
| Length | 270-295 mm |
| Locking Nuts Included | Yes |
| Material | Aluminum Alloy |
| Pre-Greased | Yes |
| Washers Included | Yes |
| Vehicle Placement | Rear |
| Wheel Alignment Required | No |
| Notes | Length 270-295mm. Bolt Diameter 10mm. |