Product Details
This Whiteline Front Control Arm Lower Inner Rear Bushing fits the 2007-2011 Toyota Camry Hybrid (XV40). Chassis code: XV40. The part number is W53372. It goes on the front of the vehicle. In the box: 2 shell bushings. Whiteline's note for this fit: Standard Replacement.
Every time the wheel moves, the control arm swings on its bushings. When they are soft or worn, the arm shifts under load, the alignment changes as the car moves, and steering and braking feel less precise. A stiffer bushing cuts that unwanted movement while still letting the arm pivot freely. The polyurethane used here deflects much less than the original rubber under the same load.
Expect a difficult job of about 2.5 hours. An alignment is required after installation. We also list Adjustable Front Sway Bar Link, 15mm Adjustable Front Camber Bolts, and Rear Sway Bar Link for the Camry.
Features
- Grease: Molybdenum disulfide grease comes with it for a longer service life.
- Bushing compound: A synthetic elastomer compound resists oil, grease, ozone, and weathering.
- Finish: The metal parts are powder coated for durability.
- Corrosion protection: A protective plating covers the metal components to guard against corrosion.
- Bonded design: The bushing is bonded for extra strength under heavy loads.
- Install guide: Instructions for fitting are packed in the box.
Specifications
| Part Number | W53372 |
| Part Name | Control Arm Bushing |
| Vehicle | 2007-2011 Toyota Camry Hybrid |
| Chassis Code | XV40 |
| Bushing 1 Inner Diameter | 14.2 mm |
| Bushing 1 Outer Diameter | 60.4 mm |
| Bushing Quantity | 2 Shell Bushings |
| Grade Type | Regular |
| Installation Difficulty | Difficult |
| Installation Time (hrs) | 2.5 |
| Kit Contents | 2 Shell Bushings |
| Material | Polyurethane |
| Mounting Hardware Included | No |
| Vehicle Placement | Front |
| Wheel Alignment Required | Yes |
| Notes | Standard Replacement |


