Product Details
This Whiteline Adjustable Rear Sway Bar Link fits the 2007-2010 Hyundai Elantra SE (HD). Placement: rear. The part number is KLC106. You receive 2 links.
Links are small parts with a large effect on how a car leans in a corner. They sit between the bar and the suspension and decide how quickly and how evenly the bar's resistance reaches the tire, and this rear link is built to keep that connection firm. Its adjustable body lets you set the length with the car on the ground, so the bar is not twisted against its own mounts before the car even moves.
Installation is rated moderate, with about 1 hour of work listed. It does not require a wheel alignment. To go with it on the Elantra, see Front Sway Bar Link Kit, Rear Lower Trailing Arm Bushing, and Front Lower Inner Rear Control Arm Bushing Kit - Double Offset.
Features
- Preload-free setup: The length can be set on the car to remove preload from the sway bar.
- Construction: High-strength alloy gives the strength needed without much weight.
- Pre-greased: Comes pre-greased, so it can go straight on the car.
- Rigid design: A stiffer design than the factory part gives a more immediate response.
- Ball joints: Steel ball joint ends handle the loads and rotate to suit the car's geometry.
- Anodized alloy: Anodized alloy parts resist corrosion and wear and look good doing it.
Specifications
| Part Number | KLC106 |
| Part Name | Sway Bar Link |
| Vehicle | 2007-2010 Hyundai Elantra SE |
| Chassis Code | HD |
| Adjustable | Yes |
| Bolt Thread Diameter | 10 mm |
| Grade Type | Performance |
| Grease Fitting Included | No |
| Greaseable | No |
| Installation Difficulty | Moderate |
| Installation Time (hrs) | 1 |
| Kit Contents | 2 Links |
| Length | 230-255 mm |
| Locking Nuts Included | Yes |
| Material | Aluminum Alloy |
| Pre-Greased | Yes |
| Washers Included | Yes |
| Vehicle Placement | Rear |
| Wheel Alignment Required | No |
| Notes | - |



