Product Details
This Whiteline Rear Sway Bar Link fits the 1991-1998 Nissan 240SX Base, LE (S13/S14). Chassis code: S13/S14. In the box: 2 links. Position: rear. Application note: Suits Whiteline Sway Bar Only- Adjustable Extra Heavy Duty. The part number is KLC109.
A sway bar link is the short rod that ties each end of the rear sway bar to the suspension. Whenever the body leans, the link carries that motion into the bar, so any slop, flex, or wear in it is slop in the whole roll-control system. A body that adjusts in length means the link can be matched to the car instead of the other way around, and the bar starts from a neutral position.
Installation is rated moderate, with about 1 hour of work listed. No alignment is needed afterward. Other Whiteline parts we list for the 240SX: Rear Subframe Mount Bushing, 12mm Adjustable Front Camber Bolts, and Front and Rear Sway Bar Kit.
Features
- Material: Made from steel.
- Compliance voids: Voids molded into the bushing allow suspension articulation and soften sharp road inputs.
- Rigid design: Built to remove the flex found in factory parts, so inputs reach the bar sooner.
- Pre-greased: Comes pre-greased, so it can go straight on the car.
- Install guide: Written install instructions are included with the part.
- Hardware: Hardware supplied: locking nuts and washers.
Specifications
| Part Number | KLC109 |
| Part Name | Sway Bar Link |
| Vehicle | 1991-1998 Nissan 240SX Base, LE |
| Chassis Code | S13/S14 |
| Adjustable | Yes |
| Bolt Thread Diameter | 10 mm |
| Grade Type | Performance |
| Grease Fitting Included | No |
| Greaseable | No |
| Installation Difficulty | Moderate |
| Installation Time (hrs) | 1 |
| Kit Contents | 2 Links |
| Length | 85-95 mm |
| Locking Nuts Included | Yes |
| Material | Steel |
| Pre-Greased | Yes |
| Washers Included | Yes |
| Vehicle Placement | Rear |
| Wheel Alignment Required | No |
| Notes | Suits Whiteline Sway Bar Only- Adjustable Extra Heavy Duty |

