Product Details
This Whiteline Rear Subframe Mount Bushing fits the 1989-1998 Nissan 240SX SE (S13/S14). The kit contains 4 shell bushings. Part number W92446. Placement: rear.
The rear subframe is the cradle that the rear suspension arms bolt to, and the car is attached to it through rubber mounts that are soft on purpose. That softness lets the subframe shift under hard cornering or acceleration, which dulls the feel of the rear end. A firmer bushing set holds the subframe in position, so the rear responds more directly to steering and throttle.
Expect a moderate job of about 4 hours. Plan on a wheel alignment afterward. To go with it on the 240SX, see 12mm Adjustable Front Camber Bolts, Front and Rear Sway Bar Kit, and Rear Sway Bar Link.
Features
- Compliance voids: Voids molded into the bushing allow suspension articulation and soften sharp road inputs.
- Corrosion protection: Rust protection comes from plating on the metal parts.
- Bushing material: Made of polyurethane, which resists deflection better than soft rubber.
- Bonded design: The bushing is bonded for strength where loads are highest.
- Bushing compound: The bushing material stands up to oil, grease, ozone, and weather.
- Serviceable: A grease fitting is included, so the part can be re-greased as it ages.
Specifications
| Part Number | W92446 |
| Part Name | Subframe Mount Bushing |
| Vehicle | 1989-1998 Nissan 240SX SE |
| Chassis Code | S13/S14 |
| Bushing Color | Black |
| Bushing Height | 76.6 mm |
| Bushing Inside Diameter | 22.3 mm |
| Bushing Material | Polyurethane |
| Bushing Outside Diameter | 66.3 mm |
| Color | Black |
| Durometer | 72 |
| Grade Type | Performance |
| Grease Fitting Included | No |
| Greaseable | Yes |
| Installation Difficulty | Moderate |
| Installation Time (hrs) | 4 |
| Kit Contents | 4 Shell Bushings |
| Material | Polyurethane |
| Mounting Brackets Included | No |
| Mounting Hardware Included | No |
| Vehicle Placement | Rear |
| Wheel Alignment Required | Yes |
| Notes | - |



