Product Details
This Whiteline Adjustable Rear Sway Bar Link fits the 1989-2001 Toyota Corolla LE (E90/E100/E110). Part number KLC141. The kit contains 2 links. Application note: Suits models with control arm link mount: adjustable extra heavy duty. This part is for the rear of the vehicle.
Links are small parts with a large effect on how a car leans in a corner. They sit between the bar and the suspension and decide how quickly and how evenly the bar's resistance reaches the tire, and this rear link is built to keep that connection firm. Its adjustable body lets you set the length with the car on the ground, so the bar is not twisted against its own mounts before the car even moves.
Whiteline rates the install as easy and lists about 1 hour. It does not require a wheel alignment. Other Whiteline parts we list for the Corolla: 12mm Adjustable Front Camber Bolts, Front Control Arm Lower Inner Front Bushing, and Front Sway Bar Washer Kit.
Features
- Rigid design: Built to remove the flex found in factory parts, so inputs reach the bar sooner.
- Pre-greased: Joints arrive pre-greased and ready to install.
- Ball joints: Steel ball joint ends handle the loads and rotate to suit the car's geometry.
- Hardware: Hardware supplied: locking nuts and washers.
- Install guide: Step-by-step installation instructions come with it.
- Material: The part is made of steel.
Specifications
| Part Number | KLC141 |
| Part Name | Sway Bar Link |
| Vehicle | 1989-2001 Toyota Corolla LE |
| Chassis Code | E90/E100/E110 |
| Adjustable | Yes |
| Bolt Thread Diameter | 10 mm |
| Grade Type | Performance |
| Grease Fitting Included | No |
| Greaseable | No |
| Installation Difficulty | Easy |
| Installation Time (hrs) | 1 |
| Kit Contents | 2 Links |
| Length | 115-140 mm |
| Locking Nuts Included | Yes |
| Material | Steel |
| Pre-Greased | Yes |
| Washers Included | Yes |
| Vehicle Placement | Rear |
| Wheel Alignment Required | No |
| Notes | Suits models with control arm link mount - adjustable extra heavy duty. Length 110-135mm |



