Product Details
This Whiteline Heavy Duty 18mm Rear Sway Bar fits the 2004 Mitsubishi Lancer Sportback (CS). You receive 1 sway bar, 2 bushings, and 2 saddles. The part number is BMR79. Application note: Suits models with OEM sway bar: non adjustable. It goes on the rear of the vehicle.
Roll control is shared between the springs and the bars, and the rear bar is the easier one to use for fine tuning balance. A stiffer bar keeps the rear flatter and moves the car toward a more neutral feel. It is a fixed design with a single stiffness setting, which keeps it simple.
Expect a moderate job of about 2 hours. It does not require a wheel alignment. To go with it on the Lancer, see 12mm Adjustable Front Camber Bolts, Front Control Arm Lower Inner Rear Bushing, and Rear Sway Bar Link.
Features
- Lateral locks: Built-in lateral locks hold the bar in position side to side.
- Corrosion protection: Metal parts are plated to resist rust over the long term.
- Install guide: Instructions for fitting are packed in the box.
- Roll control: Reduces body sway through turns.
- Bushing material: Polyurethane bushings flex far less than rubber ones.
- Bar mounts: The mounts have an internal bore pattern and lips that retain grease.
Specifications
| Part Number | BMR79 |
| Part Name | Sway Bar |
| Vehicle | 2004 Mitsubishi Lancer Sportback |
| Drivetrain | FWD |
| Chassis Code | CS |
| Adjustable | No |
| Bar Color | Silver |
| Bar Diameter | 18 mm |
| Bushing Color | Black |
| Bushing Material | Polyurethane |
| Bushings Included | Yes |
| Finish | Powder Coated |
| Grade Type | Performance |
| Installation Difficulty | Moderate |
| Installation Time (hrs) | 2 |
| Kit Contents | 1 Sway Bar, 2 Bushings, 2 Saddles |
| Material | Solid Spring Steel |
| Mounting Brackets Included | No |
| Mounting Hardware Included | No |
| Suspension Grade Type | Performance |
| Sway Bar Links Included | No |
| Vehicle Placement | Rear |
| Wheel Alignment Required | No |
| Notes | Suits models with OEM sway bar - non adjustable |




