Product Details
This Whiteline Front Control Arm Lower Inner Rear Bushing fits the 2002-2004 Mitsubishi Lancer LS (CS). In the box: 2 shell bushings and 2 tubes. Whiteline's note for this fit: Standard Replacement. It goes on the front of the vehicle. Part number W53382.
Every time the wheel moves, the control arm swings on its bushings. When they are soft or worn, the arm shifts under load, the alignment changes as the car moves, and steering and braking feel less precise. A stiffer bushing cuts that unwanted movement while still letting the arm pivot freely. The polyurethane used here deflects much less than the original rubber under the same load.
Whiteline rates the install as difficult and lists about 2.5 hours. Get the car aligned once it is back on the ground. We also list 14mm Adjustable Front Camber Bolts, Adjustable Sway Bar Vehicle Link Kit, and Rear Sway Bar Link for the Lancer.
Features
- Bonded design: Bonding adds durability in high-load use.
- Self-lubricating: Internal grease reservoirs keep the bushing lubricated as it works.
- Finish: A powder coated finish resists corrosion and wear.
- Material: The part is made of polyurethane.
- Corrosion protection: A protective plating covers the metal components to guard against corrosion.
- Install guide: Written install instructions are included with the part.
Specifications
| Part Number | W53382 |
| Part Name | Control Arm Bushing |
| Vehicle | 2002-2004 Mitsubishi Lancer LS |
| Drivetrain | FWD |
| Chassis Code | CS |
| Bushing 1 Inner Diameter | 14.3 mm |
| Bushing 1 Outer Diameter | 60.2 mm |
| Bushing Quantity | 2 Shell Bushings |
| Grade Type | Regular |
| Installation Difficulty | Difficult |
| Installation Time (hrs) | 2.5 |
| Kit Contents | 2 Shell Bushings, 2 Tubes |
| Material | Polyurethane |
| Mounting Hardware Included | No |
| Vehicle Placement | Front |
| Wheel Alignment Required | Yes |
| Notes | Standard Replacement |



