Product Details
This Whiteline Rear Lower Inner Rear Control Arm Bushing Kit fits the 2018-2022 Hyundai Kona. You receive 2 shell bushings and 2 tubes. Whiteline's note for this fit: Fits inner position of rear lower control/spring perch arm. Placement: rear. The part number is W63495.
A control arm bushing is the pivot where the arm joins the chassis or the wheel carrier. Factory rubber is chosen for quiet and comfort, so it squashes under braking, acceleration, and cornering and lets the arm move more than it should. A firmer replacement keeps the arm where it belongs, which steadies the alignment and gives the car a more consistent feel. Polyurethane resists deflection far better than the soft rubber it replaces.
Whiteline rates the install as moderate and lists about 2 hours. An alignment is required after installation. Other Whiteline parts we list for the Kona: Front Control Arm Lower Inner Front Bushing, 14mm Adjustable Front Camber Bolts, and Front Sway Bar Link Kit.
Features
- Self-lubricating: Grease reservoirs inside the bushing feed lubrication as it moves.
- Install guide: Whiteline packs an install guide with it.
- Material: Built from polyurethane.
- Bushing compound: Oil, grease, ozone, and weather do not break down the synthetic elastomer used in the bushings.
Specifications
| Part Number | W63495 |
| Part Name | Control Arm Bushings |
| Vehicle | 2018-2022 Hyundai Kona |
| Chassis Code | K2 |
| Drivetrain | AWD/FWD |
| Bushing 1 Inner Diameter | 14.3 mm |
| Bushing 1 Outer Diameter | 44.2 mm |
| Bushing Quantity | 2 Shell Bushings |
| Grade Type | Regular |
| Installation Difficulty | Moderate |
| Installation Time (hrs) | 2 |
| Kit Contents | 2 Shell Bushings, 2 Tubes |
| Material | Polyurethane |
| Mounting Hardware Included | No |
| Vehicle Placement | Rear |
| Wheel Alignment Required | Yes |
| Notes | Fits inner position of rear lower control/spring perch arm |