Product Details
This Whiteline Front Control Arm Lower Inner Front Bushing fits the 2019-2022 Hyundai Kona. You receive 4 bushings and 2 tubes. Order it as part number W53492. It goes on the front of the vehicle. It is listed for the K2 chassis.
A control arm bushing is the pivot where the arm joins the chassis or the wheel carrier. Factory rubber is chosen for quiet and comfort, so it squashes under braking, acceleration, and cornering and lets the arm move more than it should. A firmer replacement keeps the arm where it belongs, which steadies the alignment and gives the car a more consistent feel. Polyurethane resists deflection far better than the soft rubber it replaces.
Expect a difficult job of about 2.5 hours. Plan on a wheel alignment afterward. Working on the same car? We also list Adjustable Rear Upper Control Arm Set, 14mm Adjustable Front Camber Bolts, and Front Sway Bar Link Kit for the Kona.
Features
- Corrosion protection: Metal parts are plated to resist rust over the long term.
- Grease: Molybdenum disulfide grease comes with it for a longer service life.
- Bushing compound: Oil, grease, ozone, and weather do not break down the synthetic elastomer used in the bushings.
- Material: Made from polyurethane.
- Finish: Powder coating covers the metal for protection against chips and rust.
- Self-lubricating: The bushing carries its own grease supply in internal reservoirs, so it keeps moving freely.
Specifications
| Part Number | W53492 |
| Part Name | Control Arm Bushing |
| Vehicle | 2019-2022 Hyundai Kona |
| Chassis Code | K2 |
| Drivetrain | AWD/FWD |
| Bushing 1 Inner Diameter | 12.2 mm |
| Bushing 1 Outer Diameter | 37.7 mm |
| Bushing Quantity | 4 Bushings |
| Grade Type | Regular |
| Installation Difficulty | Difficult |
| Installation Time (hrs) | 2.5 |
| Kit Contents | 4 Bushings, 2 Tubes |
| Material | Polyurethane |
| Mounting Hardware Included | No |
| Vehicle Placement | Front |
| Wheel Alignment Required | Yes |
| Notes | - |