Product Details
This Whiteline Rear Upper Outer Control Arm Bushing Kit fits the 1998-2004 Honda CR-V EX (RD1/RD2). You receive 4 bushings and 2 tubes. Application note: In hub: adds +/- 1.0 degrees Camber. Position: rear. Chassis code: RD1/RD2. Part number KCA368.
Most factory control arm bushings are centered and fixed. An offset one is built so the arm sits at a slightly different angle, which changes camber, and the firmer material stops that setting drifting under load.
Whiteline rates the install as moderate and lists about 3 hours. Get the car aligned once it is back on the ground. We also list Adjustable Rear Sway Bar Link, Adjustable Rear Upper Control Arm Set, and Front Sway Bar Washer Kit for the CR-V.
Features
- Install guide: Written install instructions are included with the part.
- Grease: Moly grease is supplied to prolong the life of the parts.
- Finish: The metal parts are powder coated for durability.
- Material: Made from polyurethane.
- Self-lubricating: Internal grease reservoirs keep the bushing lubricated as it works.
- Corrosion protection: The hardware is plated to stand up to road conditions.
Specifications
| Part Number | KCA368 |
| Part Name | Control Arm Bushings |
| Vehicle | 1998-2004 Honda CR-V EX |
| Drivetrain | FWD/AWD |
| Chassis Code | RD1/RD2 |
| Bushing 1 Inner Diameter | 12.2 mm |
| Bushing 1 Outer Diameter | 42 mm |
| Bushing Quantity | 4 Bushings |
| Grade Type | Performance |
| Inside Diameter | 12.2 mm |
| Installation Difficulty | Moderate |
| Installation Time (hrs) | 3 |
| Kit Contents | 4 Bushings, 2 Tubes |
| Material | Polyurethane |
| Mounting Hardware Included | No |
| Outside Diameter | 42 mm |
| Vehicle Placement | Rear |
| Wheel Alignment Required | Yes |
| Notes | In hub - adds +/- 1.0Degree Camber; |



