Product Details
This Whiteline Rear Upper Inner Control Arm Bushing Kit (Standard Repl.) fits the 2016 Subaru BRZ Series.HyperBlue (ZC6). The part number is W63225. It goes on the rear of the vehicle. In the box: 8 bushings and 4 tubes.
Control arm bushings wear out quietly. Over time the rubber hardens, cracks, or tears, and the arm starts to move in ways its designers did not intend, which shows up as clunks, vague steering, or uneven tire wear. A standard replacement bushing puts the pivot back to the way the car was built.
Whiteline rates the install as moderate and lists about 3 hours. Get the car aligned once it is back on the ground. Other Whiteline parts we list for the Subaru BRZ: Adjustable Rear Sway Bar Link, Front Control Arm Lower Inner Rear Bushing, and Adjustable Front Sway Bar Link.
Features
- Material: The part is made of polyurethane.
- Bushing compound: Oil, grease, ozone, and weather do not break down the synthetic elastomer used in the bushings.
- Self-lubricating: Grease reservoirs inside the bushing feed lubrication as it moves.
- Corrosion protection: Plated finish keeps rust off the hardware.
- Install guide: Step-by-step installation instructions come with it.
Specifications
| Part Number | W63225 |
| Part Name | Control Arm Bushing |
| Vehicle | 2016 Subaru BRZ Series.HyperBlue |
| Chassis Code | ZC6 |
| Bushing 1 Inner Diameter | 12.2 mm |
| Bushing 1 Outer Diameter | 34 mm |
| Bushing 2 Inner Diameter | 12.3 mm |
| Bushing Quantity | 8 Bushings |
| Grade Type | Regular |
| Installation Difficulty | Moderate |
| Installation Time (hrs) | 3 |
| Kit Contents | 8 Bushings, 4 Tubes |
| Material | Polyurethane |
| Mounting Hardware Included | No |
| Vehicle Placement | Rear |
| Wheel Alignment Required | Yes |
| Notes | - |




