Product Details
This Whiteline Rear Upper Inner Control Arm Bushing (Standard Repl.) fits the 2000-2004 Ford Focus LX, ZTS (C170). In the box: 2 shell bushings and 2 tubes. Whiteline's note for this fit: Standard Replacement: suits cast arms. This part is for the rear of the vehicle. Whiteline part number: W63322.
Control arm bushings wear out quietly. Over time the rubber hardens, cracks, or tears, and the arm starts to move in ways its designers did not intend, which shows up as clunks, vague steering, or uneven tire wear. A standard replacement bushing puts the pivot back to the way the car was built.
Installation is rated moderate, with about 3 hours of work listed. Get the car aligned once it is back on the ground. Other Whiteline parts we list for the Focus: Rear Sway Bar Link, Adjustable Front Sway Bar Link, and Heavy Duty Blade Adjustable 22mm Rear Sway Bar.
Features
- Bushing compound: Oil, grease, ozone, and weather do not break down the synthetic elastomer used in the bushings.
- Self-lubricating: Internal grease reservoirs keep the bushing lubricated as it works.
- Corrosion protection: Plated finish keeps rust off the hardware.
- Material: The part is made of polyurethane.
- Finish: The metal is powder coated, which resists corrosion and wear.
- Bonded design: The bushing is bonded for extra strength under heavy loads.
Specifications
| Part Number | W63322 |
| Part Name | Control Arm Bushing |
| Vehicle | 2000-2004 Ford Focus LX, ZTS |
| Chassis Code | C170 |
| Bushing 1 Inner Diameter | 12.2 mm |
| Bushing 1 Outer Diameter | 38 mm |
| Bushing 2 Outer Diameter | 36 mm |
| Bushing Quantity | 2 Shell Bushings |
| Grade Type | Regular |
| Installation Difficulty | Moderate |
| Installation Time (hrs) | 3 |
| Kit Contents | 2 Shell Bushings, 2 Tubes |
| Material | Polyurethane |
| Mounting Hardware Included | No |
| Vehicle Placement | Rear |
| Wheel Alignment Required | Yes |
| Notes | Standard Replacement - suits cast arms |



