Product Details
This page covers the Whiteline Rear Sway Bar Link for the 2000-2018 Ford Focus (C170/C307/C346). Order it as part number W23180. Position: rear. You receive 2 links.
A sway bar link is the short rod that ties each end of the rear sway bar to the suspension. Whenever the body leans, the link carries that motion into the bar, so any slop, flex, or wear in it is slop in the whole roll-control system.
Expect an easy job of about 1 hour. It does not require a wheel alignment. To go with it on the Focus, see Adjustable Rear Upper Control Arm Set, Adjustable Sway Bar Vehicle Link Kit, and Adjustable Front Sway Bar Link.
Features
- Ball joints: Steel ball joint ends handle the loads and rotate to suit the car's geometry.
- Rigid design: Built to remove the flex found in factory parts, so inputs reach the bar sooner.
- Easy to fit: Installation does not call for special skills or tools.
- Install guide: Whiteline packs an install guide with it.
- Corrosion protection: Plated finish keeps rust off the hardware.
- Preload-free setup: The length can be set on the car to remove preload from the sway bar.
Specifications
| Part Number | W23180 |
| Part Name | Sway Bar Link |
| Vehicle | 2000-2018 Ford Focus |
| Drivetrain | FWD |
| Chassis Code | C170/C307/C346 |
| Bolt Thread Diameter | 10 mm |
| Grade Type | Performance |
| Installation Difficulty | Easy |
| Installation Time (hrs) | 1 |
| Kit Contents | 2 Links |
| Length | 80-320 mm |
| Material | Steel |
| Vehicle Placement | Rear |
| Wheel Alignment Required | No |
| Notes | Universal cut to length link - must cut to 76mm |

