Product Details
This Whiteline Rear Upper Inner Control Arm Bushing Kit fits the 2002-2004 Ford Focus SVT, ZTW (C170). In the box: 2 shell bushings and 2 tubes. Application note: Suits cast arm. On-car adjustable allows +/-1.0 degrees Camber. Part number KCA394. Position: rear.
Lowering a car or fitting wider tires can push camber out of the range an alignment shop can correct with factory parts. This offset bushing moves the arm's pivot point to give the technician more to work with, while also replacing the soft rubber that was there.
Expect a moderate job of about 2 hours. Get the car aligned once it is back on the ground. Other Whiteline parts we list for the Focus: Adjustable Front Sway Bar Link, Rear Sway Bar Link, and Heavy Duty Blade Adjustable 22mm Rear Sway Bar.
Features
- Camber adjustment: Designed to optimize camber alignment and offset the effect of body roll and tire roll in corners.
- Material: Polyurethane construction.
- Finish: The metal is powder coated, which resists corrosion and wear.
- Install guide: An install guide comes in the box.
- Self-lubricating: The bushing carries its own grease supply in internal reservoirs, so it keeps moving freely.
- Grease: Moly grease is supplied to prolong the life of the parts.
Specifications
| Part Number | KCA394 |
| Part Name | Control Arm Bushing |
| Vehicle | 2002-2004 Ford Focus SVT, ZTW |
| Chassis Code | C170 |
| Bushing 1 Inner Diameter | 12 mm |
| Bushing 1 Outer Diameter | 38 mm |
| Bushing 2 Outer Diameter | 36.2 mm |
| Bushing Quantity | 2 Shell Bushings |
| Grade Type | Performance |
| Inside Diameter | 12.2 mm |
| Installation Difficulty | Moderate |
| Installation Time (hrs) | 2 |
| Kit Contents | 2 Shell Bushings, 2 Tubes |
| Material | Polyurethane |
| Mounting Hardware Included | No |
| Outside Diameter | 38 mm |
| Vehicle Placement | Rear |
| Wheel Alignment Required | Yes |
| Notes | Suits cast arm. On-car adjustable allows +/-1.0Degree Camber; |




