Product Details
This Whiteline Rear Upper Inner Control Arm Bushing Kit fits the 2000-2006 Ford Focus ZX3 (C170). Application note: Suits cast arm. On-car adjustable allows +/-1.0 degrees Camber. In the box: 2 shell bushings and 2 tubes. This part is for the rear of the vehicle. The part number is KCA394.
Most factory control arm bushings are centered and fixed. An offset one is built so the arm sits at a slightly different angle, which changes camber, and the firmer material stops that setting drifting under load.
Expect a moderate job of about 2 hours. Get the car aligned once it is back on the ground. We also list Adjustable Front Sway Bar Link, Rear Sway Bar Link, and Heavy Duty Blade Adjustable 22mm Rear Sway Bar for the Focus.
Features
- Finish: Powder coating covers the metal for protection against chips and rust.
- Bushing compound: A synthetic elastomer compound resists oil, grease, ozone, and weathering.
- Camber adjustment: Helps hold the tire flatter on the road by correcting camber changes through roll.
- Self-lubricating: The bushing carries its own grease supply in internal reservoirs, so it keeps moving freely.
- Bonded design: A bonded design adds strength for high load applications.
- Grease: Supplied with molybdenum disulfide grease for extended service life.
Specifications
| Part Number | KCA394 |
| Part Name | Control Arm Bushing |
| Vehicle | 2000-2006 Ford Focus ZX3 |
| Chassis Code | C170 |
| Bushing 1 Inner Diameter | 12 mm |
| Bushing 1 Outer Diameter | 38 mm |
| Bushing 2 Outer Diameter | 36.2 mm |
| Bushing Quantity | 2 Shell Bushings |
| Grade Type | Performance |
| Inside Diameter | 12.2 mm |
| Installation Difficulty | Moderate |
| Installation Time (hrs) | 2 |
| Kit Contents | 2 Shell Bushings, 2 Tubes |
| Material | Polyurethane |
| Mounting Hardware Included | No |
| Outside Diameter | 38 mm |
| Vehicle Placement | Rear |
| Wheel Alignment Required | Yes |
| Notes | Suits cast arm. On-car adjustable allows +/-1.0Degree Camber; |




