Product Details
These Whiteline Rear Upper Control Arms fit the 2007-2010 Ford Mustang Shelby GT500 (S197). Part number KTA204. It goes on the rear of the vehicle. The kit contains 1 arm.
Rear camber is hard to change on many cars because the factory arms are fixed length. Replacing them with adjustable arms lets you change the wheel angle directly, which is useful after lowering the car, fitting wider tires, or whenever the rear tires wear on one edge.
Whiteline rates the install as moderate and lists about 2 hours. Plan on a wheel alignment afterward. Application note: Complete new heavy duty arms: on-car adjustable for pinion angle, recommended use with KSB729 rear chassis brace motorsport. We also list Adjustable Rear Sway Bar Link, 14mm Adjustable Front Camber Bolts, and Adjustable Front Sway Bar Link for the Mustang.
Features
- Finish: Powder coating covers the metal for protection against chips and rust.
- Install guide: Step-by-step installation instructions come with it.
- Bushing material: Made of polyurethane, which resists deflection better than soft rubber.
- Corrosion protection: Rust protection comes from plating on the metal parts.
- Pinion angle: Helps set pinion angle for less vibration and better power delivery.
Specifications
| Part Number | KTA204 |
| Part Name | Control Arm |
| Vehicle | 2007-2010 Ford Mustang Shelby GT500 |
| Chassis Code | S197 |
| Adjustable | Yes |
| Ball Joint Included | No |
| Bushing Color | Black |
| Bushing Material | Polyurethane |
| Bushings Included | Yes |
| Construction | Boxed |
| Control Arm Color | Silver |
| Control Arm Construction | Boxed |
| Control Arm Material | Steel |
| Grade Type | Performance |
| Grease Fitting Included | No |
| Installation Difficulty | Moderate |
| Installation Time (hrs) | 2 |
| Kit Contents | 1 Arm |
| Material | Steel |
| Pre-Assembled | Yes |
| Set | No |
| Suspension Grade Type | Performance |
| Vehicle Placement | Rear |
| Wheel Alignment Required | Yes |
| Notes | Adjustment range 198-220mm (7.81"-8.66") - complete new heavy duty arms - on-car adjustable for pinion angle - recommended use with KSB729 rear chassis brace MOTORSPORT |




