Product Details
This Whiteline Adjustable Front Sway Bar Link Adjustable fits the 2005-2014 Ford Mustang Base, GT (S197). The kit contains 2 links. Position: front. Whiteline's note for this fit: Adjustable Extra Heavy Duty. The part number is KLC169.
Links are small parts with a large effect on how a car leans in a corner. They sit between the bar and the suspension and decide how quickly and how evenly the bar's resistance reaches the tire, and this front link is built to keep that connection firm. Because the length is adjustable, the link can be set on the car so the bar sits relaxed at rest, which matters most after a change in ride height.
Expect a moderate job of about 1 hour. It does not require a wheel alignment. We also list Adjustable Rear Sway Bar Link, 14mm Adjustable Front Camber Bolts, and Front and Rear Sway Bar Kit for the Mustang.
Features
- Construction: Made from strong, light alloy.
- Hardware: The kit includes locking nuts and washers.
- Anodized alloy: Anodized alloy parts resist corrosion and wear and look good doing it.
- Rigid design: A stiffer design than the factory part gives a more immediate response.
- Preload-free setup: The length can be set on the car to remove preload from the sway bar.
- Ball joints: Heavy duty steel ball joint ends pivot freely through a wide range, which helps fitment.
Specifications
| Part Number | KLC169 |
| Part Name | Sway Bar Link |
| Vehicle | 2005-2014 Ford Mustang Base, GT |
| Chassis Code | S197 |
| Adjustable | Yes |
| Bolt Thread Diameter | 12 mm |
| Grade Type | Performance |
| Grease Fitting Included | No |
| Greaseable | No |
| Installation Difficulty | Moderate |
| Installation Time (hrs) | 1 |
| Kit Contents | 2 Links |
| Length | 270-295 mm |
| Locking Nuts Included | Yes |
| Material | Aluminum Alloy |
| Pre-Greased | Yes |
| Washers Included | Yes |
| Vehicle Placement | Front |
| Wheel Alignment Required | No |
| Notes | Adjustable Extra Heavy Duty. Length 270-295mm. Bolt Diameter 10mm. |


