Product Details
The S197 Chassis Third Link Set Up to your 2007-2008 Ford Mustang Shelby GT (S197) has suffered from brake hop and axle tramp with the stock arm and the ultra-compliant stock bushing is designed for comfort and leaves something desired for performance driving. Whiteline's upper control arm is built with 4130 Chromalloy and features the longer arm length which Ford incorporated in the 2011 change which reduces brake hop. The synthetic elastomer bushing adds increased stability to the rear end without the harshness of the commonly used bearing design and features and eccentric crush tube which allows pinion angle / instant center adjustment without weakening the arm with a turnbuckle adjustment. The pinhole voiding feature allows the bushing to articulate without binding. The heavy duty mount adds to the increased rigidity of the arm and is designed to be universal for all years of the S197 chassis.
Standard Features
- Engineered to alter/ optimize vehicles pinion angle to minimize vibration and increase rear drive power/torque to the wheels.
- Install guide included providing detailed instructions on how to install your new Whiteline purchase.
- Protective plating on all metal components acts as a hard skin that is much tougher than conventional paint allowing this product to withstand the toughest conditions and resist corrosion for years to come.
- Protective powder coating acts as a hard skin that is much tougher than conventional paint allowing this product to withstand the toughest conditions and resist corrosion for years to come.
Specifications
| Part Number | KTA204 |
| Part Name | Control Arm |
| Vehicle | 2007-2008 Ford Mustang Shelby GT |
| Chassis Code | S197 |
| Adjustable | Yes |
| Ball Joint Included | No |
| Bushing Color | Black |
| Bushing Material | Polyurethane |
| Bushings Included | Yes |
| Construction | Boxed |
| Control Arm Color | Silver |
| Control Arm Construction | Boxed |
| Control Arm Material | Steel |
| Grade Type | Performance |
| Grease Fitting Included | No |
| Installation Difficulty | Moderate |
| Installation Time (hrs) | 2 |
| Kit Contents | 1 Arm |
| Material | Steel |
| Pre-Assembled | Yes |
| Set | No |
| Suspension Grade Type | Performance |
| Vehicle Placement | Rear |
| Wheel Alignment Required | Yes |
| Notes | Adjustment range 198-220mm (7.81"-8.66") - complete new heavy duty arms - on-car adjustable for pinion angle - recommended use with KSB729 rear chassis brace MOTORSPORT |
Vehicle Fitment
- 2007 Ford Mustang Shelby GT (S197)
- 2008 Ford Mustang Shelby GT (S197)